1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

20" Speedlines - on an 8P?

Discussion in 'A3/S3/Sportback (8P Chassis)' started by Dan320is, Dec 25, 2012.

  1. Dan320is
    Offline

    Dan320is Member

    Joined:
    Nov 4, 2012
    Messages:
    42
    Likes Received:
    1
    [Dec 25, 2012]
    Just a thought guys, are Speedlines available in 20" 5x112? I've seen them for a Q7 5x130 PCD.
    #1
  2. Ads

    Ads

    [Jan 25, 2015]

  3. JamesS4cab
    Offline

    JamesS4cab Well-Known Member

    Joined:
    Mar 4, 2008
    Messages:
    1,147
    Likes Received:
    89
    [Dec 26, 2012]
    Offset for the 8p is 5x112............
    #2
  4. Ian_tdi
    Offline

    Ian_tdi Member

    Joined:
    Feb 3, 2011
    Messages:
    306
    Likes Received:
    4
    [Dec 26, 2012]
    Stid pattern for 8P is 5x112 not 130 so by the time you hsve included adapters the etc would probably be too low.

    Maybe 20" from an A/S6 or A8 etc?
    #3
  5. max69vk
    Offline

    max69vk Active Member

    Joined:
    Apr 3, 2012
    Messages:
    771
    Likes Received:
    45
    [Dec 26, 2012]
    Once you've used adapters the offset combined with the wheel width will make the Q7 alloys unusable. AFAIK only the Q7 came with the 20" versions (though I would live to be proved incorrect) :)
    #4
  6. MartayMcFly
    Offline

    MartayMcFly Booooooost Regional Rep VCDS Map User

    Joined:
    Feb 17, 2009
    Messages:
    2,709
    Likes Received:
    314
    [Dec 26, 2012]
    Q7 will be ET60 and 9" wide, so there is room to fit adapters. 20x9 will be tough to get into the arches though, very limited in terms of fitting offsets.

    I think the biggest 5x112 versions were 19x9 and there's a few 19x8.5 fitments.
    #5
  7. max69vk
    Offline

    max69vk Active Member

    Joined:
    Apr 3, 2012
    Messages:
    771
    Likes Received:
    45
    [Dec 26, 2012]
    Q7 has an ET of 55 to 45mm even with 15mm adapters (if you can find them) you'll be running a 9" wheel at ET40 at best.
    #6
  8. timmythechef
    Offline

    timmythechef Starin' Through My Rear View

    Joined:
    Jan 23, 2011
    Messages:
    265
    Likes Received:
    18
    [Dec 26, 2012]
    You could run ET40 on a 9j. Would need to be slammed to pull it off though.

    It needs to be at least ET47 to clear the strut.
    #7
  9. polo classic
    Offline

    polo classic New Member

    Joined:
    Jun 10, 2009
    Messages:
    18
    Likes Received:
    1
    [Dec 27, 2012]
    Speedlines for Q7 are 10x20 ET 44, so after adapters you are looking at 10x20 ET 29 or lower
    #8
    MartayMcFly likes this.
  10. MartayMcFly
    Offline

    MartayMcFly Booooooost Regional Rep VCDS Map User

    Joined:
    Feb 17, 2009
    Messages:
    2,709
    Likes Received:
    314
    [Dec 27, 2012]
    So bottom line is basically - 20" Speedlines won't work.
    #9
  11. polo classic
    Offline

    polo classic New Member

    Joined:
    Jun 10, 2009
    Messages:
    18
    Likes Received:
    1
    [Dec 27, 2012]
    I belive they have made a 8,5x20 ET 33 Speedline for Q5, 5x112

    Original Felge 8r0601025m1h7
    #10

Share This Page