1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

2.0 T fault code

Discussion in 'Audi S4/A4/A4 Cab (B7 Chassis)' started by bez101, Jan 15, 2013.

  1. bez101
    Offline

    bez101 Yorkshire & Humber Rep. Regional Rep VCDS Map User

    Joined:
    Jul 8, 2008
    Messages:
    8,920
    Likes Received:
    528
    [Jan 15, 2013]
    any ideas cam follower ok and changed fuel filter changed
    ?

    [TABLE="class: gumax-row"]

    [TD="class: gumax-row-right"][h=2]18725/P2293/008851 - Fuel Pressure Regulator Valve (N276): Mechanical Malfunction[/h][h=4]Possible Symptoms[/h]
    • Malfunction Indicator Light (MIL) ON
    • Power Loss
    [h=4]Possible Causes[/h]
    • Fuel Pressure too Low
    • Intake Camshaft Failure
    [h=4]Possible Solutions[/h]
    • Check Measuring Values for Fuel Pressure
    • Check for bent/squeezed Fuel Lines
    • Check Fuel Pressure System for Leaks
    • Check Fuel Filter & Filter in Fuel Pump
    • Check Fuel Quantity supplied by the Fuel Pump
    [h=4]Special Notes[/h]
    • When found in 2.0l TFSI:
      • Check Fuel Pressure
      • Rest of World (RoW) check TPI 2014143, the Intake Camshaft might have a worn out Fuel Pump Cam.
      • North American Region (NAR) check TSB 2015153 (01-09-03 > 15-10-01 > 15-10-02), the Intake Camshaft might have a worn out Fuel Pump Cam.
      • North American Region (NAR) check TSB 2018183 (20-08-01) and verify the High Fuel Pressure Sensor (G247) Part Number
    Retrieved from "18725/P2293/008851 - Ross-Tech Wiki"
    Category:






    [/TD]
    [TD="class: gumax-row-left"][h=5]Categories[/h]
    [h=5]Meta[/h]
    [​IMG]
    [/TD]
    [/TABLE]
    #1
  2. Ads

    Ads

    [Oct 22, 2014]

  3. bez101
    Offline

    bez101 Yorkshire & Humber Rep. Regional Rep VCDS Map User

    Joined:
    Jul 8, 2008
    Messages:
    8,920
    Likes Received:
    528
  4. bez101
    Offline

    bez101 Yorkshire & Humber Rep. Regional Rep VCDS Map User

    Joined:
    Jul 8, 2008
    Messages:
    8,920
    Likes Received:
    528
    [Jan 23, 2013]
    right its had a new HPFP and follower
    cam sensor fuel line that was a bit kinked (prob happend when hpfp was replaced
    fuel filter
    #3
  5. GarJE
    Offline

    GarJE Member

    Joined:
    Feb 18, 2010
    Messages:
    34
    Likes Received:
    5
    [Jan 23, 2013]
    What is your measured fuel pressure?
    #4

Share This Page