1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

1.8t front wiper problem

Discussion in 'A4/A4 cabriolet/S4 forum(B6 chassis)' started by Mart77, May 11, 2013.

  1. Mart77
    Offline

    Mart77 Member

    Joined:
    Mar 7, 2013
    Messages:
    90
    Likes Received:
    9
    The front wipers stopped working this morning, I've noticed the motor is still working and the mech is moving freely however the nut holding it onto the motor has come off, just wondering if its just a compression fit or does the bar have a thread on it? Also does anyone know what size nut it is?
    #1
  2. dualmono21
    Offline

    dualmono21 Well-Known Member

    Joined:
    Dec 9, 2006
    Messages:
    1,040
    Likes Received:
    58
    mine did exactly the same
    difficult to get at the little bugger im afraid without taking the front windscreen scuttle off the car
    it needs to be done up quite tight but once done it should be o.k
    #2
  3. Mart77
    Offline

    Mart77 Member

    Joined:
    Mar 7, 2013
    Messages:
    90
    Likes Received:
    9
    Yeah that's what I've done seems to be ok now :).

    I know the motor part has teeth on it but should the mech side have teeth?
    #3

Share This Page