1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

09 White Cluster/DIS fitted to 04 8P

NHN Mar 3, 2009

  1. scottie123

    scottie123 (●̮̮̃•̃) (●&#

    1,972
    2
    36
    Yes they did Nige.

    Tbh, I must say they were great. Stuart is a nice guy and they kept bringing me coffee all the time, and let me watch what I wanted to on the tele.

    I just wish they were closer, because I would use them all the time if they were. They just show up my local dealers to be the useless thick monkeys I have always thought they were
     
  2. Khufu

    Khufu Well-Known Member

    5,705
    31
    48
    If they cant, tell them to phone Nigels Audi dealer!!! TBH, i was concerned too after hearing of difficulties but even the Skoda dealer I used who is authorised to do Audi's can do it so how hard can it be? If they cant, dont pay!!!
     
  3. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    29,272
    1,685
    113
    Well I must ring Stu tomorrow to say thanks for looking after you mate, they really are the dogs ****** when comes to audi dealers, think they were voted 3rd in country, tbh I'd say number 1 from my dealings.
     
  4. scottie123

    scottie123 (●̮̮̃•̃) (●&#

    1,972
    2
    36
    I'd agree with that sir

    Beers are going through cyberspace as we speak ( I presume your paypal addy is the same?)

    I just read the start of the thread. Spooky huh. Just been out and done the coding. Bish bash bosh. Lights are gone. Woohoo.

    Even managed to code the wash sensor out so that light has buggered of now aswell.

    Have tried to enable advanced menus on the cluster, but here I have stumbled. It may appear that my car's module doesnt support it, as byte 23 is not available :( it only goes to 20 :(

    Ahh well, most went well :)
     
  5. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    29,272
    1,685
    113
    I was joking you tart about the beers, lol.

    Most well went, fxck me its immense that white cluster now mate, its a nice touch for sure.
     
  6. scottie123

    scottie123 (●̮̮̃•̃) (●&#

    1,972
    2
    36
    +1 It brings the interior bang up to date for sure.

    Deffo my new fav mod:)
     
  7. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    29,272
    1,685
    113
    Paypal addy same as cable, yes, but if you have sent anything mate, it has gone to someone else, as it hasnt arrived in my account lmfao
     
  8. Sarah's A3

    Sarah's A3 MODERATOR V6 S3 Hybrid Staff Member Moderator

    5,920
    30
    38
    lol, Scotties been drinking again!
     
  9. scottie123

    scottie123 (●̮̮̃•̃) (●&#

    1,972
    2
    36
    Just remember where I live Nige.

    My cyber payments have to go through carrot fields, dodge tractors and avoid married siblings before it gets to somewhere normal...............
    :crying:
     
  10. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    29,272
    1,685
    113
    Scotties, Isabella sends you a kiss, albeit with a few burps & some milk on her face, but kiss none the less for her new teddy/blanky I will buy her with your very kind funds sent to me, very nice of you mate, thanks for that, its appreciated & will get spent on her not me.
     
    Last edited: Sep 24, 2010
  11. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    29,272
    1,685
    113
    LMFAO nearly feel of me chair reading that lol.
     
    Last edited: Sep 24, 2010
  12. scottie123

    scottie123 (●̮̮̃•̃) (●&#

    1,972
    2
    36
    :icon_thumright:
     
  13. Khufu

    Khufu Well-Known Member

    5,705
    31
    48
    Its all gravy mate LOL

    ive added more functions to the DIS by changing to a newer canbus gateway & newer conveniece module LOL. I'm still missing a few functions but im guessing its a CE change needed. N & I are looking into some major undertakings in that department, its just I may shortly have some interesting hardware to play with he wont LOL
     
  14. tee2803

    tee2803 New Member

    9
    0
    1
    :( Has any one got a phone no of an audi dealer that has done this so i can get in conntact with them so thy can tell my local dealer how to do it.Or does any know anyone in the midlands that can do it ? every one in the midlands keeps messin me around and its starting to cost.....took it to 1 place today and they said they can not code it because when they connect to germany it comes up and tells them its in the wrong car...plz help
     
  15. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    29,272
    1,685
    113
    Ok 1st asking a dealer to tell another dealer would be a slight piss take tbh, I would suggest a trip down south or up north to a dealer we successes have used.

    & the old connect to germany **** is mostly absolute ******, yes they do connect, but they can choose to ignore the messages in VAS anyway, I know cause I've done it with them, it will popup this car has some anomolies, but it asks you if you wish to code them, all they do is go into the module directly afterwards & use guided fault find.
     
  16. maars

    maars Full speed ahead

    576
    3
    18
    Would a 8P0 920 951 RX cluster fit my 2007 TDI?
    Are there any recommended Southern Audi dealers?
     
  17. tos

    tos New Member

    11
    0
    1
    I went to dealer today, and they cannot swap cluster :banghead:
    Correct cluster should be 873 B, 874B have different (new) immo or something like that they said.
    And just like you wrote to gti forum.

    They copied kilometers and all settings from old to new, and when they tried keys:
    "exception error"

    This cluster is incompatible to my car
     
    Last edited: Sep 28, 2010
  18. tee2803

    tee2803 New Member

    9
    0
    1
    Can any one tell me if this cluster will fit my car

    Old cluster no: 8PO 920 981 A
    New cluster no: 8PO 920 982 CX

    Just to make sure iam not trying to fit one that wont work with mey car..
     
  19. klik

    klik Member

    234
    11
    18
    Which white cluster would fit a left hand drive April 2008 pre-facelift S3?
    thnx in advance
     
  20. s3wil

    s3wil New Member

    17
    0
    1
    Apart from the colour are there any other differences? Can we not just change the LEDs?
     
  21. Khufu

    Khufu Well-Known Member

    5,705
    31
    48
    The dis part beween the clocks is a higher resolution display too. The new cluster supports extra functions too & is compatible with things like park assist.
     
  22. Teo

    Teo New Member

    11
    0
    1
    Hi there!!!!
    I'm new here so I'll be quick!!!

    Can anyone tell me if this cluster will fit my car

    Old cluster no: 8PO 920 900 E (without DIS)
    New cluster no: 8PO 920 930 G (with DIS)

    Thanx
     
  23. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    29,272
    1,685
    113
    It would appear so yes, please keep these questions to the forum, not PM's, thanks.
     
  24. Teo

    Teo New Member

    11
    0
    1
    Sorry for the PM but I'm a little desperate with this.

    What else do I need to know about the new cluster?

    Like immo no, codes etc??

    Thank you
     
    Last edited: Feb 14, 2011
  25. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    29,272
    1,685
    113
    Take it to a dealer & get coded, you will need to disable washer sender or fit one iirc.
     
  26. Teo

    Teo New Member

    11
    0
    1
    You mean the one that troughs water?
    Thanx
     
    Last edited: Feb 15, 2011
  27. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    29,272
    1,685
    113
    If I Remember Correctly

    troughs?? It is the sensor that tells you when the washer bottle fluid is low for the windscreen wash.
     
  28. Teo

    Teo New Member

    11
    0
    1
    Thank you and sorry for the stupid questions
     
  29. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    29,272
    1,685
    113
    No worries.
     
  30. ~RS~

    ~RS~ Active Member

    1,466
    22
    38
    Good thread Nige, I got a facelift cluster that you said would be good for the 2.0TDi in this thread PN -(8p0 920 982 J).
    I'm going it to have fitted when I find somewhere in London to the swap + code. I was wondering though... In the beginning of the thread you said you 11/04- owners could check by removing old cluster and checking to see if a pin is wired up. Excsue the newb Q... How is the old cluster removed? Also how would I check the pump part no. against my VIN?

    Cheers
     
  31. Khufu

    Khufu Well-Known Member

    5,705
    31
    48
    undo the steering adjustment bar & pull the wheel out & down. Pull out towards you the trim under the cluster. You will see two bolts, remove & then the cluster comes out. At the back there is a clip on the multiplug that needs rotated and then the clip comes out at the same time.
     
  32. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    29,272
    1,685
    113
    Yes contact audi & ask what pump part is fitted & check the wiring on the pins.
     
  33. Lewbo

    Lewbo Well-Known Member

    1,265
    103
    63
    hi my friend knows someone who has a brand new 09 cluster and was wondering if it will fit my car
    my current cluster is 8p0 920 981 M (dis)
    new one is 8P0 920 982 EX (dis)
    i know audi have to code it to work but with the clocks been brand new would i be correct in saying that they will set the mileage to my current one now?
    how much is this to get coded too thanks.
     
  34. Lewbo

    Lewbo Well-Known Member

    1,265
    103
    63
    Can anyone shed anylight on this please Many thanks
     
  35. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    29,272
    1,685
    113
    It does apppear to be ok, you need to test it in your car momentarily to make sure it lights up ok, but you will also need to reset somethings when refitting old one after test, vcds needed for this.
     
  36. Mike071288

    Mike071288 Active Member

    287
    26
    28
    Hi Rich, did you manage to find a place in London, ive managed to get myself a white cluster for my car too, want to get it fitted asap, maybe we can get it sorted same time?
     
  37. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    29,272
    1,685
    113
    Strange thought you already had a cluster.
     
  38. Mike071288

    Mike071288 Active Member

    287
    26
    28
    Yer i did, it was for a diesel though, so i sold it to Rich, now i got one for a petrol for myself :p
     
  39. Teo

    Teo New Member

    11
    0
    1
    Hi there guys,

    I'm from Greece and I want to know if I can fit a used cluster (8PO 920 930 G [with DIS]) bought it from Germany to my old malfunctioned cluster (8PO 920 900 E [without DIS]).

    I went to a VCDS dealer but he couldn't retrieve the data from the old cluster and the new one had no connection with the can-bus.

    After that I went to an Audi dealer. They found 10 failures from the old cluster (broken) and they told me that they couldn't switch the clusters because they don't have the same part number (connection with the factory issues, etc). For the failures, witch I don't know them because they didn't give me the paper (Audi policy), I paid 50 Euros. Also they give a 450 euros price for the new cluster with the same part number.

    That's all guys
    Please if anyone can help, it will be appreciated.

    Thanx
     
  40. Teo

    Teo New Member

    11
    0
    1
    Any advice????
     

Share This Page