Search results for query: *

cheers again ...i'll get onto first thing tomorrow ..hopefully they will have the part in stock ..i'll report back if it solves the problem

PM sent .....i think...hahaha

Thanks for the advice .....think i'm going to bite the bullet and buy the harness...you wouldn't know if its a soldering job would you ?

just been for a drive with vcd-lite connected and set to measuring block set 1 ..was reading all four wheels at the correct wheel speed ..when the light comes on there's no reading for front left wheel but its fine on the rest, this is why i think its a short in the harness. having bought new...

hi vag-tech thanks for your quick response, i believe the air gap to be correct and the corrosion was fully cleaned up .. think everything is pointing to the harness . thing is it can be good for days then all of a sudden returns...... the car is a 1998(8L) s reg ...1.8 sport non turbo version...

Hi all ive been plagued by the same problem for a long time now...its the 00283 code (g47) front left wheel sensor ...i've fitted 2 different sensors which haven't sorted the problem last week changed both front abs ring hoping that this would help ...but no light is still on intermittently can...

so might need a new hub then..another part to add to the list..lol cheers tuffty

little bit of surface rust and doesn't look damaged. could i try cleaning the abs ring and if so what would you suggest i clean it with?? thanks in advance

hi tuffty..sorry for the lack of information, when i first replaced it was ABS Wheel Speed Sensor Front Left (G47) faulty. now after replacing its showing 00283 - ABS Wheel Speed Sensor Front Left (G47): Mechanical Malfunction thing is with it unbolted there is no error code, as soon as i do...

bump

possible causes for the camshaft sensor- Faulty Camshaft Position Sensor - Camshaft Position Sensor harness is open or shorted - Camshaft Position Sensor circuit poor electrical connection - Faulty starter motor - Starting system circuit - Dead (Weak) battery

after scanning with vag-com got the 00283 code (G47)front left sensor. replaced the sensor and cleared the code but within 2 days it was back. so thinking the new sensor was bad i ordered another only for the same to happen again, so to cut a long story short ,now when i fit the new sensor...

did you ever sort this problem? as i also need to replace one of my wiring harnesses ...i think it may go to the abs module which is behind the air filter box

my a4 avant bolted straight down through the boot ...the a3 they come in through the side http://www.audi-sport.net/xf/thread...l-westfalia-detachable-towbar-install.116758/

cheers found it now.was passenger side hiding behind the central locking pump..just for future reference if anyone needs the colour coding of the wires are lefthand side Tail light -Grey/yellow indicator-Black/White Brake light-Red/White Righthand side Tail light-Grey/White...

summer's here and its time to take the kidz in the caravan !! could anyone point me in the right direction as to the electric's on my towbar. ive fitted the towbar and routed the 7 core wire into the car and identified what wire is what, using a multimeter. just dont know which side to wire it ...

think the normal A3 wont fit the S3 because it would hit the exhaust. just fitted a westfalia swan neck to my 99 A3 and didn't need to cut the bumper !!! now i need help with the electric's ..lol

defo crankshaft censor had the same on mine ...20 pound to replace the censor. just behind the oil filter bit of a ****** to get at easier to take the filter off

try the antenna amp first .you can get to it by taking the rear interior light out

you can buy the pump blades off ebay..but they cost as much as a second hand pump