Search results for query: *

Next day! Checked the oil levels in the cylinders. Seems okay, only cil 2 a bit more, but i can live with that. I will clean and check the rings when the pistons are out. Did a bit of cleaning, and removing rubbish. Yesterday I removed the pan, and the pistons. Prepared...

It has been a while since the last parts arrived. But the last 2 weeks i have been working on the car again. so here is a big update. I try to clean everything as good as possible, and replace what is necessary. I jacked the S3 up, and started to remove the head. one bolt of the...

Drill and use ar reversed tap.

just pull it out. carefully ;)

Some other parts arrived today! Head gasket kit head bolts rear brake pads Oil filter Petrol filter Thermostat which opens a little earlier Full timingbelt kit Piston ring compressor Magnet and a socket for the connectingrod bolts. still need a turbo Injectors Manifold Downpipe Oil and...

Nope, just 2 holes in the bottom. rifle is a good option, but not necessary. I know people who had engines without the rifle, and they still run perfect ;)

Thanks. No it is just a bypass. Sounds great imo :P

I have been reading and posting for a while on the forum, And I tought I should share my progress of my S3 ;) I'm from Holland, so don't be hard on the english haha. This is the car Done a few mods, such as; Big custom FMIC piping welded by myself :D Fitted a Spec solid flywheel, and a...

why didn't the downpipe fit with the mani? any pics? :P

If you can get a steppermotor to fit, it would be awsome! Adjustment from inside the car :D

next time If you change calipers, you first need to push in and hold/block the brake pedal an inch or 2, so the holes in the mastercylinder are closed. the fluid wil stay in the lines and will not drain. as an extra, you can clamp the hoses. A lot less air in the lines, and much easyer bleeding.

That is your locking. The rest is the same ;)

SPEC Clutches & Flywheels: Auto Parts, Domestic, Import, Truck, Racing, Drifting :: Home i got it from ebay, was a bit cheaper for the same product.

I have a Spec billet flywheel in my S3. the noise is acceptable when the AC is off. If AC is turned on, it rattles like a mofo... The only thing is, that you have a lot more noise and vibration when you are breaking on the engine. But in combination with a Sachs organic race clutch (I have...

Ow crap haha. Can it be moved to the right section? You do not gain any power, but it drives quicker.

A while ago I chipped my 210Hp APY S3. never had it on the rollers, but is was very quick. Yesterday I had a bit of spare time, so I put it on the dyno. The results were shocking! The mods: n249 delete Empty Cats Lighter flywheel 600x300 Fmic Wideband Ecu+lambda 291Hp, and 479Nm...

bone stock. (only mods lighter flywheel (7KG instead of 14KG), FMIC and big brake kit) Here in holland we pay taxes by weights. So this was a better option than a newer type that weights 1420kg maybe LHD makes it lighter? I don't know. Recaro's black leather heated APY no sunroof and stuff

My S3 (is a original german car) and is 1375Kg MY2000

dualmass fried i think. Had the same, down to the bottom, pulled it up, made it just to home, and it was on the bottom again. there was a lot of play on the flywheel what caused the slave cilinder to burn.

U need to be under the part you just removed ;)