Search results for query: *

  1. matt blowen

    Amber turn signals as drl’s

    I have just removed pin 1 from my headlight switch which turns the fogs off also i can turn them on/off with the switch but i have new problem..... the low beam come on instead [emoji2959] Sent from my iPhone using Tapatalk
  2. matt blowen

    Amber turn signals as drl’s

    At the moment when my light switch is in the off position my front fogs are lit also my front corner turn signals are lit, is there any way of running the fogs independently? I remember changing summet in vcds a while ago but at the time couldn’t find any options for fogs? thanks for any...
  3. matt blowen

    Facelift Puddle light wiring?

    Hey guys, 2014 a3 8v, puddle lights activated using carista, i cant find supply voltage pin, people have suggested pin 16 for + and pin 5 for ground, on my meter pin 16 is only 8volts, so i tested each pin and cant find a 12v feed, thanks for any input[emoji1303] Sent from my iPhone using Tapatalk
  4. matt blowen

    Brd crank snapped!!

    Hi there, my crank has snapped and was wondering if i can use my turbo and injectors on a 140bhp bkd to bring it to 170bhp? Is that the only difference thanks Sent from my iPhone using Tapatalk
  5. matt blowen

    Heat Coming from panel under steering column

    Hows your coolant level? Sent from my iPhone using Tapatalk
  6. matt blowen

    Heat Coming from panel under steering column

    That heat would be coming from the heater matrix, there is a foam seal around the back facing outward toward your knee to stop the draft from blowing out to the side. All i can think of is that it may have a aftermarket matrix fitted or the foam seal has worn away Sent from my iPhone using...
  7. matt blowen

    Timing belt too tight!!!

    This was a picture of before so i could get a reference as to what position the tensioner was in, I've replaced the lot. I don't think i can adjust tension anyway so im just going to have to live with it at the mo Sent from my iPhone using Tapatalk
  8. matt blowen

    Timing belt too tight!!!

    This type of tensioner Sent from my iPhone using Tapatalk
  9. matt blowen

    Timing belt too tight!!!

    You cant hear the noise on this vid but seems a lot of chatter Sent from my iPhone using Tapatalk
  10. matt blowen

    Timing belt too tight!!!

    Sent from my iPhone using Tapatalk
  11. matt blowen

    Timing belt too tight!!!

    Hi guys did my timing belt on my 1.9tdi awx, All went well apart from i have got a noise on the belt just as it ends on the cam shaft pulley it seems the belt is too tight even tho ive got a 4.5 mm gap on the hydraulic damper which is within spec, question is can i adjust the tension without...
  12. matt blowen

    Electrical issue

    Just to add the the orange light does turn off when i push the button in, but obviously the circuit is still 'alive' when locked
  13. matt blowen

    Electrical issue

    Can anybody tell me what controls the window switch panel, my rear window lockout button stays illuminated all night. The window buttons and lockout button work as they should. Thanks
  14. matt blowen

    Electrical issues please help

    Is 0.76 amp too much of a draw?
  15. matt blowen

    Electrical issues please help

    Hi sandra only code in vcds is rear left door wont de safe
  16. matt blowen

    Electrical issues please help

    "Update" whilst car is all locked up ive pulled every fuse 1 by 1 and the hazard button still remains illuminated 5secs on then off then on for 5 secs again
  17. matt blowen

    Electrical issues please help

    Hi guys, my battery died after two days of no use, charged batt and worked fine but noticed my hazard button was illuminated and stays lit all nite long, when car is locked and bonnet 'trick' locked im getting a drain of about 0.80 then settles to 0.76 after 30 secs. Ive put a battery tester on...
  18. matt blowen

    a4 b6 1.9tdi coolant issue.

    Replaced stat, still the same so going to do timing belt n pump next week, my guess is the water pump isn't spinning under heavy load.
  19. matt blowen

    a4 b6 1.9tdi coolant issue.

    Ok thanks mike ill chuck a new stat in [emoji1303]
  20. matt blowen

    a4 b6 1.9tdi coolant issue.

    Ive replaced my CTS, all pipes get hot apart from the one going in to the stat and the pipe which connects the the bottom of the expansion tank also rad doesn't seem to get hot, maybe duff stat but ive i replaced it last year with a firstline one