Search results for query: *

hello, if its that bad drop the engine and so you can do your timing belt and other stuff while its out. may be new clutch if your going to keep it?

hello, I found most of everything I had to undo was ok. the front prop shaft vibration damper was a little difficult. the worst part of the removal was the exhaust cat, trying to get it over the t box and through the tunnel and out. but it will go,trust me. before I removed the turbo I tried the...

hello, short on time at the moment. have a look at this if you find it? its on here...GUIDE: How to remove turbo and clean 'sticky' vane, which causes overboost

hello, I found oil on the engine undertray. it turned out to be from the geabox breather.i put the car on level ground and removed the oil level nut.gearbox oil started to pour out. I thought this is not right? the car has done 91,000 , so I thought I would drop and change the gearbox oil. out...

look at my post. removing turbo from a Quattro....

I stripped the turbo centre core down today. I wanted to see what kind of damage there could be? the reason I pulled the turbo, my son let the oil get to low. to lazy relying on his dash warning gauge, instead of using the dipstick... when I received the new centre core there was the same amount...

I drive a citroen c2 vts, and ride an aprilia rsvr... I have sons that's why im eeer. sorry....

spelling and grammar.....not one of my good pointss

yes propshaft out.it splits in two. but if you want to change the rear donnut get it all out. its the exhaust that's the b*****d to get out. not to bad to undo,but to manoeuvre out over the 4 wheel drive bevel box.

malett are a uk company that produce centre core assemblies for turbos. medium price. mine cost £204.

tried to soften the donnut with a mixture of wd40 and leather horse tack glycerine . it soften the rubber bit still had the vibes. got the part from audi stoke 290 inc delv.

hello. I went ahead in the summer. got the car on 4 axle stands on the drive. removed the propshaft,the exhaust (which is fun:ohmy:) and pipework. there seamed very little play on the turbo shaft, so I just filled the exhaust side of the turbo with oven cleaner. also I tried to soften the rear...

prop or driveshaft. actualy driveshaft needs new boot!

I can do most engine jobs. just looks difficult to remove, compared to a front wheel drive because of additional four wheel drive system. I can take propshaft off no problem. its the lack of room to work and remove the turbo out from the back and take down and out ? just need to know if someone...

hello new to site. have been side browsing though. can anyone tell me if I can remove the turbo from a 2.0 tdi Quattro,similar to the two wheel drive version? I have been under and it looks like fun to do :-( thanks....