the daily news !!
I made several tests:
Already contrary to what I said above the "incompatibility" message appears only when you connect a device.
Test with the USB connector and connected my iPhone 4S via its USB cable. Result: Incompatibility. Normal?
Test with a USB key: first result...
I bought it used.
To be sure I would test tomorrow installation in my A3 sportback tomorrow.
I also will test the USB cable had the same reference for all AMI
The AMI Unit is an AMI CAN for A3 8P parts number 8P0 035 785. And the cable is made for A3 8P too.
The +12 v is stung on the connector D pin 15
The ground is stung on the connector D pin 12
can bus high on pin 9 and low on pin 10.
Sound goes to pin 6,21 and 22 on the 32 pin connector.
For me...
yes it's true.
There are 2 type of connection on the cable.
The quadlock is used to retrieve the can bus high and low, the ground and the +12 v
the 32 pin connector with 3 audio connections ...
I bought from my dealer a kit 4F0051510S with a cable for ipod / iphone 4F051510R (with a burgundy band) and a USB cable.
I did some tests with iphone 4S and an old ipod video classic 60GB
You think it is that this is the AMI does not work?
What type of RNS-E with you made ââthe...
I made several tests:
with CD-changer and AMI connected with the RNS-E coded for both
with CD-changer and AMI connected with the RNS-E coded for AMI only
Without the CD and AMI plugged and RNS-E coded for AMI
Always the same result ....
I bought this cable from Kufatec.
Kabelsatz Audi Music Interface AMI - RNS-E Audi A3 8P-37575
I checked the wiring PIN ok
Recode the rnse with ..XX21
Reset the RNSE.
When I turn the RNSE, It has in part a media AMI tab grayed out, it is indicated as "not connected".
When I disconnect the plug on...
Hello,
I just tried it.
It does not work ...
I have a 193B rns-e and AMI 8P.
The rns-e show "incompatibility".
Is it normal to still see the CD changer with AMI even after a (and more) reset RNSE.
Is it normal when a iphone / ipod is not powered at connection?
any idea?
thanks
Hello,
I just tried it.
It does not work ...
I have a 193B and RNSE AMI 8P.
The rns-e show "incompatibility".
Is it normal to still see the CD changer with AMI even after a (and more) reset RNSE.
Is it normal when a iphone / ipod is not powered at connection?
any idea?
thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.