Whos doing the change for u? Thy done it before? Thers no harm trying to
c if it works seen as u gna have it all open neway...its just 2 wires and a switch n simple vag code. Let me kno if ur rear fogs work after the change plz n if u had to chnge ne pin locations on the connector.
Well tbh mate...not worth the time nd headache...the wiring is different for highline n lowline nd without the correct diagrams its almst impossible. I did mine...without changing any wires only the rear lights worked on coming home feature and i cant get my rear fog lights to work at all...if...
Ive got the exact same problemate...but i switched mine from a lowline module to highline...only gt rear lights working. Cant find ne wiring diagrams to compare wiring as i believe the wiring from low to high can vary slightly. Not sure why ures is doing that...as far as coding is concerned as...
http://www.audi-sport.net/vb/attachments/f69/6634d1346780865-coming-home-lights-confused-untitled2.jpg
this is the wiring schematic that gaz initially posted for the ch/lh wring...ive decided to check the whole diagram to my car as his is highline.
everything is the same apart from:
J519 pin...
hello peeps,
just did a lowline to highline conversion of the central elec module on my a4 b7(swapped a K module for a N module)...but my rear fogs no longer work...and the coming home function i installed only the rear lights work for it...nothing at the front (LOL thread on here has been...
just so i can rule out vcds side of things... this is all correct right? i seem to have a problem saving the changes made to the central elec module...i put on trailer hitch to test it but after setting to 0 again it just doesn't save for some reason?
i had this same problem on my 2.0tdi but it was only a very hard judder at idle...had my egr valve cleaned out and it solved the problem but i can slowly feel the judder coming back...
I c wat u mean mate...yh if the switch is off it deactivates it as it should. Was thinking would it be possible just to run a feed from the frnt lights and manually join them to the system?
Yes the lighting and everything is working fine...what if i follow wiring in this tutorial as ther seems to be mre involved?
http://bigskyeuro.com/images/gallery/mikewire/pdf/CHLH_retrofit.pdf
Or will i end up with the same?
Right lol this is a strange 1...
didnt notice in the day but the rear side lights actually work fine! Thy turn on after opening drivers door wen leaving and turn on with the unlock! But ive got nothing at the front...no side lights or fog lights! So im nw assuming its a wiring problem? Ive just...
Everythings done now...modules working fine...vagcom is accepting the light sensor and logging an error. The ch switch is also active...but still no lights on lock or unlock. Cant think of what else it could be...wiring was done wth the 2 wires as mentioned before for highline...
Managed to source a N module for the car. All the programming is done but ne ideas where to find the security code? Can it be found using vagcom? As audi are refusing to give it out
No worries mate n thanks a lot for the help buddy...but wher on earth can i find one? Rang audi just to check n they said £274! And will any highline module work? Is it too difficult to do on a lowline? If so i thnk ill jus take defeat on this one n give up lol cars still at the garage but will...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.