Search results for query: *

if you have driver assist package or lane assist (included in driver assist) the car can use the lane assist camera (triangle on top of window) for high beam assist. the only catch is that it will initiate after 65 km/hour which is the speed that lane assist turns on. If you have the mirror...

i also have the seatbelt problem , also if you put your hand between the seatbelt base and the seat and push the seat there is a squicky noise coming from the seat. it's really annoying especially when you hit a bump!

In order for coming home / leaving home option to work you should have the lighting package option in your specs. Then you have To configure it through mmi ( Im also from Athens by the way :) )

I've been using acc ( acc high , the one with the bulb ) daily for the past 8 months and I really think that it is an impressive and very accurate system. Depending on how quickly it has to respond you might not get all available warnings. Normally the first action is a warning beep...

Lane assist also deactivates if you let go of the wheel for more than 15 seconds ...which sucks ! Personally I get lazy while being stuck on moderate /heavy traffic so I find the acc and lane assist very useful

if the car in front of you starts moving within 3 seconds , the acc will resume and move your car automatically. After 3 seconds you have to tap the gas pedal to start moving again. Les us know. If there is a vids setting for that , this feature is a saver for heavy traffic jams.

You must have Navigation preparation (standard in some countries,included with ami in other countries) , the shark fin shaped antenna at the roof is a good indicator that you meet the requirements. Activation code must be purchased and activated online at audi premises. the sd card containing...

Unfortunately I wont be able to do more tests , since im back on 6.1.4 . Apple has stopped signing IOS6 ,so in case I go to IOS7 I wont be able to downgrade the phone again. On the apple support forum I've found a couple of things to try 1) reboot both car AND Iphone before trying a new pair...

You are absolutely correct , already downgraded... Unfortunately tinyumbrella wont work on iphone 5 so there is a narrow time window in case someone wants to switch back to ios6.

thanks Tim I'll try to use the Bluetooth for music/audio redirection,to see if that works. In case you place a call let me know if it works.

i've reinstalled ios 7 and started from scratch with a new iphone setup. i still get static noise instead of audio. unless someone with the same car/ phone had more luck , i would advise against upgrading to ios 7 for the time being.

I've tried removing the pair and shutting down the car (working in IT is my routine troubleshooting technique for pretty much anything that stops working :P :P :P ) Sync was working normally no issues there , just audio problem.... i'll try fresh install ... (Also makes sense for IT people) :P...

I've upgraded my Iphone 5 to IOS 7 and the Bluetooth interface just stopped working... I can still browse my contacts directory and place/answer calls but you can only hear static noise from the speakers. Anyone else who has tried the above please confirm if you get the same behavior... thanks

please keep us posted , i also have the same problem with my lane assist. Bare in mind that lane assist is configured by the factory to warn you 15 seconds after you let go of the steering wheel. however i believe that that the sensor is triggered by the force you apply on the steering wheel in...

After Further testing on completely dark roads. I've reached the following conclusion: 1) the road should have no lights (makes sense) 2)should not be near a populated area (almost makes sense, cause of lights from houses etc) 3)The speed required for the system to start working is 65km / 40mph...

thanks for the info , could you please confirm at what speed the high beam assist starts working? please also let me know if you have high beam assist as part of the driver assistance package ( Adaptive Cruise Control , Lane Assist , High Beam Assist , Parking Assist , Light Rain Sensor ...

as far as i know vcds compatibility for 8v is limited at the moment , however thanks for the tip!

well mine haven't turned on not even once! I activate the system the High Beam icon with the letter A appears on the dash , but the high beam light stays off....

My 8V Sportback is equipped with High Beam Assist , however I haven't managed to get the damn thing working , not even once! after visiting the dealer to check all the related sensors , they said that every sensor is working fine and probably the problem is related to driving conditions. They...

+1 you should definitely get it ! its really worth it , you get a special feeling from the car at night . lights on front doors are indeed b&o only and lights on the mmi wheel are technology pack only.