Search results for query: *

Been in my dads b7 2.0 140, hit the brakes (pretty hard) something crunched And now the brake lights are constantly on, so i looked at the pedal switch, to find the brake pedal is about an inch away from it, can't see what the hell has moved!? Any thoughts? Thank you!

Plugged into vagcom, and I have the fault "02000 switch position implausible signal"

hello, just used my roof for the first time this year, and it's bust! I'm just charging up the laptop and hunting down my vag com cable and will plug it in later! But in the meantime thought I'd see if anyone had any ideas? putting the roof back it seems fine at first, the top lock latches...

picked up the tt yesterday, gutted! turns out only one of the coils are originals so only got one replaced! :/ ... and the misfire under load fault still remains!, looks like i will have to get the wallet out now!

Booked in at audi for ignition coil recall! Wahooo

Brill cheers for the help! Will get the coils changed after reading this, will post when I've done it! :)

Hi! got some issues with my girlfriends tt, it has a bad splutter under load/boost, at its worst in third gear about 3000rpm which at times makes the eml light flash. I've plugged in vcds and it just came up with random multiple misfire. It had new plugs about 5k ago. Wired thing is, it's...

hi all, was just wondering if the milltek cat-back exhaust sounds any good on the 3.0 v6? as i think the standard system sounds a bit tinny, and fancy a bit of a deeper note! or does anyone know of any other exhausts that are any good? cheers! :)

yes i agree! .. before i stripped the lamp, i did read a few posts on the chrome coming off, so i was careful not to damage the surface, good idea with the foil! ... i work on cars with xenons everyday, but i have never seen a problem such as this, like you say they probably are the original...

Ahh I've seen that thread before, that's what got me stripping the light down, the reflector is slightly burned, but not much to make a massive difference!

Think that's what I'm gonna go for :) will be happy if that's it :)

Hello! since I have had my a4 cab (not long) the Xenons have been poor brightness to say the least! ... Think it must be the bulbs that are old/worn? I've never seen a problem like this before though, in my experience the ballast failing causes igniting faults and flickering, and bulbs go...

Just checked, and getting it booked in! They said "yes sir the ignition coil recall is outstanding on your vehicle, feel free to book it in free of charge!" just annoyed cause I had to buy one over the weekend!

Hahaa no worries mate!

Cheers for the good response! (Mines a petrol 3.0 v6) ... Will do some shopping around now with that info :) thank you :)

I heard through word of mouth, that there is a recall on a large number of auidi's to replace all ignition coils? Anyone know if there is any truth in this?

Sorted! Got some time to mess about with vagcom and found it to be cylinder 6 coil, went into measuring blocks and found cylinder 6 doing nothing at all, constant misfire!

Just driving about, and the eml light started flashing, with a bad misfire.. I had put fuel in two miles prior (which I guarantee was correct fuel, but may be dodgy?) i plugged in vcds hoping to find a coil or something, but all that is there is p17550 load calculation cross check, lower...

That's amazing, great post! Cheers mate... Gonna get on mine again tomorrow, hopefully get them as nice as yours!

i just got 420 miles on my 3.0 v6 ... generally get around 360 - 400 ish ... would have thought the 1.8t would do a lot better than that!