Hi All, I have a A4 Avant 2006, for some time my boot release via remote does not work properly it unlocks but does not stay open ( sort of clicks ). it does the same via the soft touch unless i pull at the same time as opening and then is fine i think its the locking mech but just want to ask...
Hi all I am in need of new brake disc and pads I don't want to spend loads but obvesly do not want to skimp.
Does any one have any recommendations , have looked at pagid vented and green stuff pads but mixed reviews .
Please help as going in circles.
Thanks for reply I think I am after aesthetics more than practicality and am trying to see which model suits the car best. I have done loads of image searches but they don't usually show the model.
Hi all I am after a roof box for my b7 a4 avant, I have a set of aero bars which sit nice and low.
Does any one have any pics or advice as I want it to look good as well as be practical .
Thanks
Hi hope some one can help, have had a leak on my rear washer and think i have found where it is, between rear hear lining and as it goes along the rear boot hing.
I need help with undoing the rubber grommet and gaining accesess between the removed head lining strip and the hing.
Hope i have...
I am after one of these wheels as mine is twisted and as it must be a genuin one can any one tell me the part no or point me in the direction of where to get one. Audi a4 sline avant
Thanks in advance Alex
Hi all,
I have had my B7 A4 Avant sline now for just over a year and in the market very soon for some new rubber.
The car is used as a work car 90% of the time, so no need for soft sticky tyres just a good allrounder that last well.
Does any one have any good recomondations i have been told to...
Just a update about this problem, its all working wahoo.
I took out the amp and put the circuit board in a tray of rice and covered in rice for 24 hours (incase there was moisture ) thus the green corroction on the terminals.
I secondly resoldered the points from the main connection...
Evening all,
Just drove home from work when my front left speaker started cracling and making all sorts of noise as if the terminal was coming loose. This was doing this with the steroe on or off and intermitantly.
When i got home on further inspection i found the front left and right speakers...
Does any one have or know of the sequence to take off the desiel manifold from the 170 's. Also how hard is it as all i want to do is fit the little vacume actuator Ie does it need to come off (looks like it does).
Once i have done it ill be writting up the problems i have been having and hope...
Wright after lots of scratching of heads and a very helpfull garagae in highams park i believe i have now found the fault with my car. On the side of the manifold there is a small vacume bottle which opens and closes a flap on each manifold intake to leghnthen and shortening, thus my lack of...
Sorry for late reply don't have codes but one was air mass sensor fault and the second was intake manifold flap. Light came on twice today both short journeys but again a very hot day and in typical London traffic.
Was told that there was a software update for my car and wondered if that was...
Right a update. got it plugged in and had two faults one was air mass but when faul was cleared so was fault, took it for a drive and still no faults. Asked why it would be lacking in power a bit and said that boost was all correct and air mass readings were spot on . Have to carry on driving to...
right has not done it the only other thing is that the two times it has come on i had been out in the car and then driven it after standing for a bit and its been hot days but both have come on while driving one at 40 ish and one at10-15??????
done that, when it first came on i had been trying out speed warning then turned it off then did as said and came on so the two times i have had it on are the two times glow plug light as flashed will go and try again now. Give me 5 and ill report
Sorry is vcds the equivelent of vagcom? If so im going back to garage tomorrow as they diagnosed the first fault as the erg and replaced. I believe the error is linked in some way to the engine speed warning as i was driving today and pressed the spanner to set speed and then exceeded the speed...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.