Thought i would purchase a set of Toyo Proxes T1R s 225/40/18 for the Audi as my tyres were started to getting a bit low on tread and one of the back tyres had a slow puncture :racer:.
I will take some pictures of all the Powerflex Poly Bushes that have been installed and also take some pictures of the Solid Sub Frame Bushes once i have the car up on ramps i can take pictures easily. Ever since i have had all these Powerflex Poly Bushes and 034 Motorsport Solid Sub Frame...
Picture of the difference between the Powerflex Top Strut Mount Bushes. Normal Powerflex Top Strut Mount Poly Bushes on the left and 10mm Drop Powerflex Top Strut Mount Poly Bushes on the right.
I finally managed getting round to having the rest of the Audi poly bushed which was Powerflex Front and Rear Front Bottom Arm Bushes , Powerflex Front Top Strut Mount Bushes with Febi Top Mount Bearings but instead of having the normal Powerflex Top Strut Mount Bushes i decided to go for the...
Time for a little update as i aint been on here for about year lol :wtf:. Well in the last year i aint done much on the audi apart from service it and keep it maintained. I did do a few interior mods like install leather seats and re cloth the parcel shelf with black acoustic cloth. It has now...
Heres a few pictures of what the engine bay is looking like so far. I still have alot of goodies to install to tidy the engine bay up alot more but will all happen in good time lol :drag:.
New Dump Valve Location On The Hot Side Instead Of On The Cold Side :
After fitting my AN - 12 90 Degree Angle Hose Fitting i re installed the coolant pipe and made sure it fitted alright it fitted perfectly so i re filled the car with coolant. Started the car and let it warm up a bit and everything seemed fine. So took her for a drive and she drove beautiful...
Got round to fitting my AN - 12 90 Degree Angle Hose Fitting today i didnt take any pics last time of installing them so thought i would this time.
I just wrapped a bit of tape around the ends to stop them from getting to scratched up. Put a bit of oil around the thread of the Hose Fitting and...
Alright Bobby beale i start off by using Autoglym Engine & Machine Cleaner which cost about £10 and get it as clean as i can with this product.
Then i will keep polishing with a Dremel with a polishing pad on the end. The main polishing compounds i use are Autoglym Metal Polish and Autosol...
The car started fine and everything seemed ok till i could see a little bit of water leaking from the top of the AN - 12 T Piece. It was where the pipe coming off the top of the T Piece had to have a 90 degree bend in it to return to the Coolant Bottle and had split where it was bent on such a...
Got the Old Throttle Body installed back on the car and thought i would start the car for the first time i has been started in ages. The car has not been started since i started doing all this recent work on it which is about 6-8 weeks so fingers crossed everthing is ok :anbet:.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.