Hi Trups
I'd like to order the above kit please. Can you send me a paypal invoice for them please. jpestrada115@yahoo.com is my paypal email address.
Cheers.
Yeah mate, I've got the light pack. The puddle lights have the OEM panel single LED with 2 tiny pins in them (similar to those in SilkyS3's pics). The red warning lights have the T10/W5W regular filament globes in them.
I'm in Australia by the way (Cairns, Queensland 4870). Can you confirm...
Hi Trups
Thanks for confirming. Anyway, I managed to use some of the spare panel LEDs (that I bought from you a couple of years back for my A3 8P3 - car now sold) for the glove box and boot lights in my S3 8V saloon.
Thus, I will only need the LEDs for the front & rear door puddle lights and...
Hi t8ups
I see from Silky_S3's thread that there are 4 LEDs in the door puddle light LED module. How many LEDs are there in the upgraded boot LED module? Hopefully more than 4 LEDs so that its brighter in the boot.
Cheers.
Hi Trups
I'm keen on 2 pairs of the revised ones (new order here).
Question: will the new orders come with the little halogen bulbs? Obviously the new orders will not have the earlier versions that have these little halogen bulbs.
Cheers.
^ Well, looks like your close to nailing it then! Looks like you will just need to do the following:
Add the missing wires in your adapter (Pin 12 of the 14-connector), run these wires through the fire wall and slot the pins into A44 and C26 of the 52-pin connectors at the CEM.
The table in...
^ There's a lot of information that you need to confirm for us to be able to help you out. Looks like a wiring problem.
1. Do you have the same CE module as mine (8P0 907 063A). As your car is a 2011 and mine is a 2010, yours may be different.
2. If yes to Item 1 above, have you checked that...
And the proof that it works - here's a photo of the car with the DRL on (full brightness).
Haven't taken pics of the other functions but they work as follows:
Switch on "AUTO": Front and rear LEDs ON during daylight; headlights ON at dusk/dark with front LEDs dimmed; DRL dims when turn...
The coding that I used are as follows, everything working correctly as per factory functions including auto-lights and coming/leaving home lights and no errors on the DIS:
Byte 14: Bit 3 - Bi-xenon Headlights (with Shutter) installed = ON/checked
Byte 17: Bit 2 - Bi-xenon Headlights (with...
Finally done! First off, in case anyone will need them, the part numbers for the repair wires that will get the above connectors for the 4 loose wires. I.e., 1 x repair wire will get you 2 pins (1 at each end of the wire).
3x small pins: 000979150E
1x big pin: 000979151E
The adapter should have 4 loose wires that needs to be wired to the ECM. Your adapter have got 2 only so it doesn't sound right.
Here's a simplified version of my spreadsheet showing the pin assignments in both the 10 and 14 pin connectors. I made the font colours the same to help trace where...
This project has been really slow as I've been really busy with work and was away on holidays. Since the last post, I've bitten the bullet and ordered new OEM ballasts. The busy work and being on holidays was a good time to wait for the ballasts. I've fitted the new ballasts and a small victory...
So I was sold a halogen to bixenon adapter for a pre-facelift A3 (8P1/8P2) for my 8P3. I just spent a few hours looking closely at Elsawin and comparing the current flow diagrams of a halogen-wired and bixenon-wired 8P3 to figure out how I can re-pin the adapter to suit a 8P3. I found out that...
Sounds good Ash. Thanks for that. Will try coding it first then test again - that is after I have repinned my adapter which is for a pre-facelift model. If the test proves that the ballasts are indeed dead, will order new ones and well, wait for a couple more weeks to test it again.
I might...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.