That is what I was referring to, yes, and I found one thread about VCDS mods (needle sweep, lane assist etc). If that's all there is at the moment then no worries
Hi everyone,
Used to own an S3 and have just got a new A4 Avant 2.0 TFSI Sport. Just wondering whether there are any fun / useful things you can program with vagcom out of the box?
Cheers
Looking into my engine bay...noticed what looks like a mount flapping around above my oil filter housing. Looking in the pic below, am I supposed to have a bolt holding that hard pipe to the top of my filter housing?!
Re-starting this old thread. Took the car out today and the same issue hapenned once more. I noticed red residue on the coolant bottle top after the car had been standing for a while (and then wouldn't start)…so I think we're definitely getting boiling coolant here!
I've replaced the coolant...
Ok, so I've changed all that. It also had the PCV valve bit still in the line, so took that out too (so now there is just a straight through hose from the top of the oil filter housing to the crank case breather, vented to atmos.
However, now that I've done this, the car definitely idles worse...
yeah I read through that and that's what I thought too! Ok, good...right, now I need to find somewhere which sells 20mm i.d. oil/fuel hose in store around London :S argh
Hi guys,
I found a rubbish pipe in my PCV system so went to change it and found something which confused me. As in the picture below, the car came with the system vented to atmosphere. However there was a T-piece in there with a pipe (the one I was intending to replace) running to the top of...
Yeah, fans run. Still got that link in it that you put in a few months back - I haven't done anything else to the cooling system after that. Don't know the exact rad or fans, would need to have a shufty later
Ok, so an update on this:
- I found the boost leak causing the flutter, fixed
- I replaced the coolant temp sensor and crank pos sensor
- Scanned the car and no faults
- Took the car for a road trip for about 500 miles this weekend, and when running, the engine feels great. However, again when...
Hi all,
Changed my cam position sensor today and the old one was grubby but had metal shavings on it (not a lot, but some). Weird is that oil was changed maybe 500 miles ago at most with no shavings found in the oil then. The car has mostly been parked up, mostly because cam position sensor was...
Thanks. Yeah I don't have vagcom to check fault codes right now. Once the car starts it seems to run absolutely fine for an hour now worries...would this be consistent with a crank sensor fault?
Others have told me maybe the 409 relay?
Hi all,
Having a starting issue with my ko4 20vt APY conversion I need some help with :S Below is a description of what's going on, and I can't figure out the cause...
29th August:
Drove the car about 40 miles, no problems. Started first time, ran perfectly, no issues. Stopped at my...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.