Search results for query: *

  1. G

    Bluetooth problems

    hi I retrofitted a Bluetooth phone module into my cab If the car is stationary and I make a call I can hear and talk to people on the phone just fine. But as I’m driving along the volume of the call seems to go down to the point I can barely hear what the caller is saying. The volume doesn’t...
  2. G

    Audi a4 2006 cabriolet remote boot unlock and roof not working, please help

    If you look closely then the cover you described is held on with4/5 plastic speader rivits black plastic buttons with a hole in the middle put a screwdriver under the edge and prize upwards the top should come off and the bottom part should shrink and be able to be pulled out of the hole the...
  3. G

    Wheel arches rusting

    The car is in having its front end re sprayed as the lacquer on the bonnet has bubbled but I noticed the other day that the front wheel arches have started to rust and the paint flaking off in big chunks so having the wings done too Spoke to the guy doing the respray and he reckons it's the...
  4. G

    Remove drivers side carpet A4 cabriolet

    Sorry carnt help with the carpet but I was under the impression the Bluetooth module is under the passenger seat rather than the drivers
  5. G

    My DIY guide for Retro fitting Puddle Lights

    There is one plug grey with orange tab from memory which is from the door card electrics and various other plugs for other bits and pieces in the door. It is worth checking the fuses in the fuse box I believe that there are separate fuses for the door modules. If you had lost power to the...
  6. G

    My DIY guide for Retro fitting Puddle Lights

    Connect your loom connecter to the module , make sure all the connectors are connected properly to the module. Then just unplug the one connector only which has the thicker cables on mine they were red and brown these are the power cables to the module. Then give it a minute , make sure all...
  7. G

    My DIY guide for Retro fitting Puddle Lights

    As long as your sure it's coded correctly and you have the correct pins try it again make sure all the plugs are installed and connected correctly and pull out just the power plug the one with the thicker red and brown cables When the module powers up it does a self check and if it doesn't...
  8. G

    My DIY guide for Retro fitting Puddle Lights

    Try connecting the loom and bulb into the module and then removing the power connector leave it a minute and re connect it. The puddle lights have a function that switches off the supply if there is a problem like a loose cable. I had the same problem with getting mine to work until I connected...
  9. G

    A4 B7 Cab parking button

    Hi Soot1 I would be really grateful if you would be prepared to take the switch out of the dash and write down the part number for me I have the choice of 2 numbers but Audi carnt. Distinguish between the 2 and when I search on eBay the seller states they don't fit the a4 cab Cheers
  10. G

    A4 B7 Cab parking button

    yep if there are just rear sensors then there's no button but i'm putting front sensors in so require the button
  11. G

    A4 B7 Cab parking button

    yep if there are just rear sensors then there's no button but i'm putting front sensors in so require the button
  12. G

    A4 B7 Cab parking button

    Ive already spoke to mike and ordered some other parts off of him. When he looked up my part numbers there were 2 listed and no real description he said easiest thing to do is ask some one who has a cab to check there part number
  13. G

    A4 B7 Cab parking button

    Hi everyone wondered if someone could do me a quick favor could someone who has a b7 cab with front and rear parking sensors take out the parking button and give me the part number of the switch ? im putting parking sensors in my cab and need to buy the button that sits in the dash nest to...
  14. G

    Part Requests

    Just wanted to post and say thanks to Mike for sorting out some parts for me. He was very helpful on the phone when i came to order. I'm now eagerly awaiting my parts so just a shout out to mike to say thanks.
  15. G

    Advice on retro fitting Parking sensors

    Hey Someone us bumped into the rear of my car and drove off. Just a bit of paint damage so I have to get the rear bumper re sprayed but enough about that I'm gutted they drove off and didn't leave details So I'm now thinking of retro fitting parking sensors into the bumper as it needs a re...
  16. G

    Air bag light on due to replacement glovebox

    Probably just needs a reset with vcds where about do you live I'm sure there would be a member who would happily clear the faults for you for beer tokens
  17. G

    Recommendations for decent garage in Lincoln area?

    I know you say that you live in the north of Scotland but I had the hex and balancer shaft changed on my car at a indie garage in Glasgow if that's any good to you. I brought the remanufactured shaft and got the garage to swap it out for me. My hex key was slightly warn and very loose so in...
  18. G

    2.0 TDI oil pump / balance shaft failure?

    I've got a BPW engine and have put a remanufactured balancer shaft and longer hex shaft as a precautionary measure. When the old one was removed it was worn and I am sure it would have only been a matter of time till it went.
  19. G

    Diesel smell

    I had the same issue with my car found out that the diisapator had cracked and was leaking had it swapped out and the problem went away. I had diesal seaping all over the under tray so had to follow it all back and clean it up. My car had de in storage for a year so I guess that it go rotted away
  20. G

    Bonet release cable

    Just thought I would ask if anyone has had any problems with the Bonet release The cable seems to have stretched so you have to pull the release handle really far forward to get it to release also the cable keeps popping out of the handle. It seems really loose and the ball part of the cable...