Search results for query: *

  1. B

    Not another Nogaro!!!

    So you have a log of the voltage? Only asking, as my previous car (volvo) had this kind of situation. The voltage was ok when idling and mid revs, but dropped at high rpm. I know few 2.7t cars with this pump in original position and pushing 550-600 chp, so it just seems weird not working in 8L...
  2. B

    Not another Nogaro!!!

    What was the power level with that dyno pull? IMO, if the injectors are running out, the graph should be steady growing up to 100%. Is voltage steady (alternator working)? Or maybe try another fuel pressure regulator?
  3. B

    My minor modding thread

    Nice looking manifold! Could you take some measurements of the turbo? I would like to know the diameter of the housings and the total lenght of turbo. I could compare how my stone age turbo (Holset HX35) compares to Yours in size, so would know how tight fit mine will be.
  4. B

    BAM S3 full rebuild for Hybrid or BT

    Did You measured the ovalness with bare block? As the measuring should be done with the head on and torqued.
  5. B

    My S3 Thread

    I would say go straight with E85. Its so great stuff if the car (mostly fuel line from pump to injectors) can handle it. More torque, more power and the best thing, cooler combustion. No need for WM and the bay stays cooler. Seriously like Your build! Quality parts and not only considered to...
  6. B

    Audi s3 fuel pump

    That was a 2WD model fuel pump You have been given. The 4WD pumps has the another outlet. You can get Siemens or VDO pump for a bit less money but You have to make sure it is the pump with 2 outlets. Mine VDO was about 220€ and was bolt on.
  7. B

    Prawn and BigAls A3 Track Car

    Looking good! Unsprung weight loss for the win. Whats the weight of the disc and caliper? Also the piston diameters would be nice to know..
  8. B

    Lets get it on then, My 2.1 conversion

    That Leon runs with E85 so it needs ~30% more fuel than running with gasoline, so it "helps" to handle bigger injectors. Seriously looking forward to hear the results of Your new epic engine!
  9. B

    R32 throttle body advice on my 1.8t please

    Will the cruise control work if some other TB is mounted? Just saw some saying (few years ago) at Wortex that it wont, but is really so?
  10. B

    Easter s3 overhaul

    At least I had genuine audi 82c thermostat that I took apart. Now 88c (genuine) as I wanted more heat inside the cabin.
  11. B

    S3 Suspension and Set-up Guide

    How the front camber adjustment should be done, i.e. which part should be moved? Ball joints I guess? Just dropped the car to garage and now they called and said that they couldn't get front camber done.. EDIT: I aksed them to adjust the front camber -1.2deg and now its -1.04 and -0.50. Is that...
  12. B

    Symptoms of a dodgy MAF?

    Could MAF be end of its life time even though the readings seems fine? Car has rough idle sometimes and is running rich. I unplugged the MAF and the engine coughed two seconds and then came back "normal". Couldnt find any boost leaks and the PCV check valve is new.
  13. B

    People willing to get SMFW + Clutch from group buy?

    The main point for the unique flywheel is to be able to choose clutch cover that can handle torque with organic plate as much as possible. If I get flywheel which is designed for the S, that means I have to use those clutch setups that they have designed to be used with the FW. Not 100% sure...
  14. B

    People willing to get SMFW + Clutch from group buy?

    I want organic plate also so need better cover to handle the torque. I dont care if the part is from M5 or Fiat punto as long as it works WELL. And thanks superkarl, once again.. You seriously got good points with Your fukn oossom replies.. So why did You put KN filter to Your bike cause...
  15. B

    People willing to get SMFW + Clutch from group buy?

    Thank You for shearing Your thoughts.. Just in that case, just for You karl: Round pieces of metal VS. Flywheel. Hope that next time You know the difference... You think good grade steel is cheap? The machines and softwares cost more than Your car (even with Your jetex), the flywheel have to be...
  16. B

    People willing to get SMFW + Clutch from group buy?

    This is not the actual group buy - just asking how many could get interested. I´m planning to get unique single mass flywheel with Sachs race engineering (SRE) -765 cover from M5 BMW. Specified torque limit for the cover is 590Nm with organic plate, and 700Nm with sintered plate. Friend of...
  17. B

    BuuBBa's S3 project

    Thanks Andrew! Well the new setup will be actually a bit different than the original post says. Shame that its not allowed to edit old postes.. Bottom: 92.8mm crank, I-beam brute (rifle drilled), 9.25:1 82,5mm Wossner pistons, ACL race bearings (has some coating), ARP bolts, new oil pump. All...
  18. B

    BuuBBa's S3 project

    Bought genuine Ross tech cable and now have been logging few times. First looked block 032 which shows 2,8% so there might be tiny boost leak somewhere. Next scanned the fault codes and VCDS gave "system too rich bank 1" and "pressure drop between xxxx". I cleared the codes and went for a...
  19. B

    Help Car cut out while driving

    Mine did exactly the same last summer and the fault was the crank sensor.
  20. B

    W3STY's Progress Thread

    Great write up! Now just have to get the loom and call some friend who has garage...