Hi guys, i was recommemned to post this in here by RAF since a7 forum is pretty quiet :) I recently had this error appear in my 2012 a7 3.0 tdi , not much info available online about it, i wonder if anyone on here has experienced similar error codes before and what it may relate to? i t clears...
Yes it can be retrofitted, well at least in Ireland its offered by the dealers. Cheapest place i have found the hardware is from Audi Leipzig North in Germany, 1370 euros + shipping. Its on my list of things to buy for my 2012 a7
where is the oil leak coming from? Mine had a small oil leak which turned out to by a broken PCV valve breather thingy. Mine made similar power on the dyno but im stuck running it on 95 unleaded. I have a box of NF Octane booster ordered so that should help free up some power.
Did you get the...
OK i figured that out for the lock out put in one bought from eBay and boom still the same problem, door will not unlock from the outside. So either the replacement second hand lock has the exact same problem or something else in the system is broken. Any ideas? Or do I just need to bite the...
Im going to try the method based on the thread from B5NUT at the start of this post. Hopefully i can figure it out without breaking anything. My passenger side door doesn't open from the outside and i have a spare replacement i got from ebay. I just got myself a copy of the workshop repair guide...
Seems like they should have been doing the dyno pull in 3rd gear instead of 4th can anyone confirm that? It's the 6 speed auto box so I'm sure it would be the same gear used for all models?
Yeah that's the problem. I'm not sure if they just hadn't set it up properly on the dyno or there is an actual issue with the car. Maybe there is some carbon build up in the car, I heard that can cause issues on them. Previous owner had it check last year and it was clean. I must get myself...
I had the car up on the dyno today. It's running on 95 unleaded as that's all we have over here. It made 352 flywheel power and similar torque. The guys operating the dyno said there was some kind of electrical interference and when he touch the door outside he got a very bad shock, so not sure...
I would call the standard suspension pretty firm so I'm looking to see is there any options for springs that would be a bit softer and not lower it too much from current height
Seems like i registered here a few years back while obviously research what Audi to go far, so now here i am. Purchased a 2007 S6 last weekend, have been loving it ever since. Nothing major planned for it as it seems like there isnt much you can do performace wise to the 5.2 lump that isnt...
Didnt realise i registered here before but seems like i did. Im currently driving a modified 2.0 subaru legacy, running 340bhp at the minute, its a lot of work and extra care and attention needed due to all the modifications so im Im thinking of changing car early next year and looking at some...
thanks guys,the problem is though i dont want to go down the same modding route i did with the legacy, new turbo, intercooler fuel exhaust system, upgraded fuel system, its a lot of hassle and can cause lots of little problems the further you get away from standard setup! I said that when i...
Hi guys so im thinking its time for a change to convert from my slightly modified 2003 Subaru legacy, putting down about 350bhp, to either an 2006/2007 S4 or RS4, obviously Rs4 being my preference. So a few questions i have that will help me with the decision making process:
1. Is there any...
Hi guys,
I'm looking to change cars soon and i can across your forum tonight during some research, I'm currently driving a 2005 Subaru Legacy running about 340bhp at the minute, looking to move up a few years and get something with similar/more power out of the factory than my sometimes...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.