Just to answer to my own post.
After removing back part of the gearbox I noticed, that one of the pressure pipes was snapped. So now gearbox has to come out to be repaired. Also need to find why that pipe has snapped.
Hi,
Did some one on here had a problem with forward clutch slipping on CVT?
When Drive selected car will not move when foot lifted off the brake, it does start moving but just when revs go over 1500rpm. No matter how much RPM engine spins at car barely moves.
It works fine in reverse though...
Thank you for helping me out, I have used public transport last week, so have not looked at sorting low beam problem. But needs to be sorted by next week.
Aragorn - where would I find bulb monitoring unit?
Sent from my ASUS_T00G using Tapatalk
Sorry, I confused my self, after reading thread yesterday night I thought we're talking about low/dip beam (should have read this again in the morning before posting here).
So I have no low beam (high beam, side lights indicators etc works fine). And there's 12v in the fuses 20 and 21 after...
Hi all, I have now same problem with my main beam. And it's not the stalk/switch as I have checked that already. It does look like there's no 12v coming to the switch or fuses after I turn on the ignition. Everything else works just fine as it should be.
Does anyone have diagram of which of...
I've read online that someone has used Redline MT90 75w90 GL4 for both gearbox and diff so I've bought 4l of it and only changed gearbox atm will change rear diff oil with seals as well, not sure if I need to change bearings or something more inside as the noise getting worse every time I drive it.
Hi everyone,
Could someone help me please. I've bought Redline MT90 75w90 GL4 oil for my gearbox and rear diff. But then I found that rear diff oil supposed to be GL5 spec. Will it damage my rear diff if I use GL4 or will it be fine? There's noise from rear end, and it does not sound like a...
On their website they state that flywheel will Upgrade 228mm Clutch to S4/RS4 240mm Clutch for Audi A4 B5 1.8T. But on the email they saying it won't fit. Gotta ask them again.
TTV racing: ''The flywheel will only work on the 6 speed cars, there is not enough room in the 5 speed gearbox for the larger clutch.''
Confused now...
I'm also thinking of clutch upgrade on my 1.8TQS. Would DMF of Audi RS4 with clutch kit fit to my car? As found one cheap, nearly new, but do not know if it fits.
Well, I did not have a time (mood :?) to play with the wires and today light did not come back anymore. So hopefully it's all ok now. :)
I did not know that its common problem with these cars, as my FL 1.9TDI PD never had any issues with it. I'll be aware now for the next time.
Thanks...
Thanks, gonna have a look at it tomorrow, must be a fault in cars connector or harness.
I really thought is more complicated inside of a wear sensor. :)
Look inside of the connector, pin1 and pin2 on the brake pad connector do not match with car connector's pin1 and pin2. Where on the old brake pad numbers matched with car connector's numbering and everything worked perfect.
Hi folks,
Just installed new front brake pads yesterday and light on the dash did not go away, so went to check connectors today and found this.
Picture - http://img834.imageshack.us/img834/1205/1vdpn.jpg
Has anyone experienced that?
Could be that if front brakes were LUCAS? As my ones are ATE...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.