You'll need to take the seat out completely to be able to effect this fix, have you tried pushing the seat to the maximum forwards this should give you access to the rear bolts it did on my car!
Sent from my SM-G928F using Tapatalk
Hi I have an Audi A5 2010 cabriolet, the cigarette lighter fuse blew and i replaced with a fuse of the correct value. After replacing the fuse I seem to have an issue with the left side of the car giving me faults.! Ie: the left front headlight, left side indicator, left wing mirror won't...
I have an Audi A5 Cab with leather electric front seats , since owning the car I am a little confused as to how the operation of the front passenger seat works when I want someone to get in the back, my seats have a rocker switch with an arrow pointing in opposite directions, I would assume...
I have an Audi A5 Cab with leather electric front seats , since owning the car I am a little confused as to how the operation of the front passenger seat works when I want someone to get in the back, my seats have a rocker switch with an arrow pointing in opposite directions as in image, I...
Ive heard of hazzy days although i have been told theyre quite expensive, i will call them Mon see what they charge, funny but thought there would at least be someone close to bucks that could fit privately? Every seems to be up north
Does anyone have any idea of anyone for a good price in or around the Buckinghamshire area that can fit an ampere DVBT 400 tuner along with all the bits to my RNS-E Sat Nav been let down by someone who told me they can fit it but disappeared!
See Picture Wire with new clip attached, re attach bottom of cable first then using a flat bar or crowbar reach forward of seat where adjustment lever is where if you were sitting in seat you would pull up to move seat forward. from underneath look at how the mechanism works and wedge the bar in...
The top of the cable you should be able to see if you cleared away enough upholstery, if not try and follow the cable with your fingers, look closely you will have to unclip the top from the metal pin it is hooked over, I did it by using a long flathead screwdriver and pushing up in line with...
To start unclip the end shown in photo by pushing it out of the clip, at the bottom it has an L shaped end which loops through a hole pretty easy to pull out, leave it hanging
Next Lay a large cloth or something on the floor if you dont want to get your seat dirty and turn the chair over so the underneath is exposed, you will have to pull away most of the upholstery from the left area where the seat pivots to see the cable, the cable is the thickest black cable you...
The cover can be removed by carefully pushing a flat screwdriver in between the area at the top of the panel and pushing down towards the 3 clips which hold the top of the panel to the back of the seat, I used a flat sturdy wallpaper scraper. As you start to pull the top area away looking inside...
Once all bolts are out holding the seat in the seat will still be attached to electrical plugs embedded in the vehicle floor mine had a plastic cover which covered the wires so so remove to expose the wires and sockets be careful before removing, reach under and pull the wires out carefully...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.