Search results for query: *

So under the car today and noticed that the drop links on the front are opposite ways round. I.e. the driver side is bolted through so the nut is towards the front of the car and the other side is opposite so bolted though with nut towards the rear of the car. Anyone confirm this on theirs...

Had a play with VCDS tonight. Managed to reset the SRI successfully but the went on to run a fault scan and the following fault appeared. Address 19: CAN Gateway Labels: 1K0-907-530-V4.clb Part No SW: 1K0 907 530 S HW: 1K0 907 951 Component: J533__Gateway H16 0210...

Evening guys, So this has me puzzled. Not seen it on a caliper before with previous cars, maybe someone could tell me what it is?

I cant seem to find a tool kit to suit my CDLA S3 MY2009. Theres a kit for pre 2008 models but not for 2009. Has anyone got a kit or knows the kit that i need? The job is so straight forward, i know i can do it, i just dont have the correct locking kit.

What on earth could cause petrol to get into the oil? Slightly worried now. Car is a 09 S3 with only 36k on the clock, surely everything should be ok at this mileage?

I'm back finally after a few years away from Audi and I have bought my first S3 Looking to get some info on when to replace the timing belt and if the cam follower on the fuel pump will need done? And anything else I should be looking at for that matter I have bought a 09 facelift S3 with 36k...

As above guys, opinions welcome. Really need to source some centre caps, any suggestions anyone before i paint them?

Hey folks Decided that I didnt want to pay 200 odd squid for a new optics grill for my A3 so spent £21 and done it myself. Required: 1 x Can of Plasti dip (black) Plasti Dip - Plastic / Rubber Paint - Aerosol Can 311ml | eBay 1 x 610mm x 1000mm sheet of black viynl wrap eBay - The UK's...

I need to get some locating rings for my 8mm spacers as they are not hubcentric. Anyone recommend where to buy from? Cheers Rab

As above without breaking clips and things. Bumpers off just need a bit of advice removing it.

Audi A3 8P Grille S-Line S3 black optic 08 Sportback Cabrio Genuine Grill Bumper | eBay Anyone bought one of these? Seriously considering. this will fit anA3 2010 Sline right??

Lowered the A3 over the weekend and got the ride height exactly how i wanted it. H&R springs supplied by DPM Performance. These are the 50mm springs on an Sline so its only really been dropped about 20mm front and back. Before After Not a great before pic but you get the jist. If anyone...

As above guys. Im lowering the car this weekend so will need to get the alignment sorted out. Im in Dumfries so close to the english border, so anywhere in the surrounding area. dont mind travelling to get it done though. Any suggestions much appreciated.

Audi Alloy Wheel Fitment Guide - FREE guide to correct alloy wheel fitment

Iv decided that im going to lower my A3 2010 Sline TDI. So iv decided on H&R 50mm springs but unsure as to what spacers. Reading a few posts it seems the concensus is that 10mm all round seems to give the least problems. However, i dont no any measurements for my alloys. They are the RS4 style...

As above im looking at the following grill FK ABS Sport Grill - fit for Audi A3 (Typ 8P) Does anyone know if this is the correct one for a 2010 A3 Sline 3 Door? And has anyone had any dealings with FK grills? Iv tried emailing FK but no reply as of yet. Cheers Rab

So on night shift cleaning the car (as you do) and was thinking, as my audi is only a year old and done 10k i usually change the oil and filter around this time on any car i have had. However the car tells me i still have over a year or 9700 miles until the oil needs done. How can audi justify...

Alryt folks, recently bought my first audi an a3 sline 140 tdi 2010. Love the car, a few issues annoying me though; - bluetooth, my htc keeps disconnecting after 5 mins. - no mud flaps for the sline - ticking noise when cruising at 30mph or on boost, coming from turbo or injectors, not sure...