Hi
I have the same problem.
The pump in the tank does not pump fuel to the injection pump,its just to move fuel in the swirl in the tank.
The injection pump has its own lift pump.
I have put a one way hand pump just before the filter as the vp44 is a S.O.B to prime.
I had to use a drop of easy...
Hi
I have a vp44 pump for my 2.5tdi but has no pulley on it.
Could some body please tell me how to set the pump up
to TDC so that i can fit the pulley.
At the moment i have tried it at the 12 oclock position
but no start.
thank you all in advance.
dave king
Hi
Done some work on my tdi now it will not start.
fires up with easy start so i know the work i done is ok.
It had a pump fitted just befor i changed the rocker arms.
Now it will not fire on its own fuel.
The only thing i have not done is the alternator belt cos i
am waiting from ebay.
thank...
Hi all
Had a cam pulley break a while back and snaped the rocker arms.
Rebuilt it yesterday but no start.
cam timing is spot on i checked it about twenty times.
It will run with easy start until the vapor is gone.
It seems like pump timing is out but it is set right.
can any body give me any...
Hi
Could some one please tell me what order the camshaft bearing caps go.
I removed the caps to change the rocker arms,i made a diagram of what number
went where but lost it.
What i need is a diagram of the positions starting with 0 on the right bank and starting with 1
on tha left bank.
I did...
Hi
I am looking for a member that could sell me some rockers for my
2.5tdi.
Cam pulley broke and belt slipped a few teeth [my fault].
I changed the bolts in the pump pulley where it bolts to the cam
pulley,bolts were a fraction too long and hit on the cam bearing
where the plastic bolts to,broke...
Hi
I am wondering how to remove the plastic end cap from the camshaft end.
Took the vac pump off so thats that side sorted.
I dont want to brake it thats why i ask.
thank you very much in advance.
dave king
Hi
i need some help locating the hole in the block where the crank locking pin goes.
I have been told its on the left on the right near the bell housing and oil cooler.
Does any body have the correct location please.
thank you.
dave king
Hi
When inserting the locking pin into the block,is there a hole in the crank
for the pin to sit in.
I was told that you stick the pin in and turn the crank clock wise till it
stops,,is this correct.
Also what is the exact possition of the hole in the block.
thank you in advance.
dave king
Just a thought.
What i did is spray a bit of easy start.
if it fires up i would suspect the pump.
Also wen i put the new pump on it was a no go for two days.
Put a priming pump on no good plenty of fuel at injectors.
little bit of easy start and away it went spluttered at first.
do not use too...
Hi
The same thing happened to my 2.5tdi same year as well.
Turned out to be the edc on the pump.
I had fuel at the injectors but no go.
It started when it went into limp home max 3000rpm.
Then next day no start.
hope this helps.
Give adamss a shout he may have a pump.
davek
Hi
has any body heard from adamss24.
i was in contact with him now hehas not taken any calls for 2 days and
he has not been here.
Hope nothing has happened,nice chap.
thanks.
davek
Hi
I have not got a pictureas it is still fitted.
Its the bearing that hols the cam and oil seal at the front of the head.
It has a bit sticking up from the top with a threaded hole in.
The bit tha is broken on mine is the part that holds the oil seal,i was going to weld
A bit off the...
hi
does any body have a camshaft bearing cap laying about.
Its the one that holds the front oil seal behind the cam/pump pulley.
thank you in advance.
dave king
Great.
can you give me your email address please.
Do you have the bolt that holds it to the cam.
Cant see any PM buttons on here to pm you.
thanks.
It is the one the timing belt runs on not the pump belt
Hi
Does any body have a camshaft pully for a 1999 a4 2.5 tdi.
I broke mine in half.
I have tried most of the breakers on the net without any luck.
Its the one behind the adjustable pump pully but i think the
other one is the same.
Also looking for the passenger side cam shoe that holds the oil...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.