Thanks guys, makes complete sense these are bump stops.
Also makes sense that they would be broken given the car used to sit lower and on some spirited drives, I've hit full bump at speed which would cause them to break.
Given they are bump stops, they certainly would not be the cause of my...
I've had very squeaky rear Bilstein PSS10 coilovers for a while and just now, I pulled the rear wheels off and had a look.
Upon removing the blue guillotine sleeve (pulling it down), I noticed these broken yellow foam sleeves.
The RHS has both broken, the LHS has just one broken.
Can anyone...
I've have my PSS10's installed for over a year but in the last 2 months, the rear have developed a low speed creaking/squeaking sound.
This is low speed manoeuvres, taking off in particular, slowing down and over angulated driveways.
Started off very faint and on the odd occasion, now it's all...
They were available on B7 S4's.
I think they will fit perfectly fine on an 8P.
I ran ET43 18x8 on my old 8P, lowered about an inch, i had rubbing on 235's but clean driving on 225s.
Car looks good, it's always nice to do the first full detail.
On a side note, you might want to clean your camera lens, seems to be smudged in all the photos.
I have a Revo 2+ and I've run both the standard and linear maps.
I started my 2+ journey with the linear and didn't like it at all before switching to the regular map.
The reasons for my switch to the regular map seem to be the complete opposite of what you are saying.
With the linear map, it...
Good work Trups, looks forward to seeing the finished product.
Just to clarify, what exactly have you created?
Is it an LED which fits into the OEM housing or is it a new housing containing LEDs?
Or is it a wiring loom which enables the OEM A5 LEDs?
If it is a replacement LED, how bright are...
Most definitely. I had it booked in for a gearbox, haldex and rear diff oil change as first port of call, the bill would have come to more than half of the new tyres which were on their way out anyway.
i'll still do the oil/fluid changes as good maintenance in the near future but something I...
Small update for me on this issue, thankfully mine was tyres.
The noise got worse for me, in all gears now and much louder, decided to rotate front to back (had done this recently) and the noise has thankfully gone.
New tyres are on the cards.
Congratulations on finishing this beast.
Looks fantastic, what an amazing effort.
Good luck with your first race, make sure you keep us updated on progress.
I get whining on deceleration and overrun.
Happens in 1, 2 or 3, sound disappears if I put it in neutral or depress the clutch.
Anyone else have this issue?
CSC3 on my S3 have worn in the same way on the fronts.
Probably about 20k kms, the front in side edges are down to the wear indicators.
Mine are also 'MO'.
I'll most likely be replacing with CSC5 when I change up shortly.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.