Search results for query: *

  1. A

    B6 2.7 Twin Turbo Engine Swap

    Plus tax is cheaper
  2. A

    B6 2.7 Twin Turbo Engine Swap

    Buying a used s4 to swap out motor won't be any different on insurance, plus his car is sorted so why buy a other car with problems? Swap away gav!
  3. A

    Uncommon v6 swirl flap error

    You can't just delete the flaps, it will need to be mapped out
  4. A

    Uncommon v6 swirl flap error

    I've yet to see the flaps in the intake fail, it's either the rod has come off or the actuators that has failed, you can use vcds to actuate the motor and check the operation of each side or cycle the ignition and visually check them for full movement, the 5pin actuators on eBay are new genuine...
  5. A

    S4 B5 TTE600 MRC stg 3

    Yea I've got 2.4 heads and we're going to get them ported more to suit forced induction than n/a, cosworth heads are hard to find in uncracked condition and the exhaust port would take ad much work as the 2.4 head to flow right and reduce ex temps
  6. A

    S4 B5 TTE600 MRC stg 3

    I've read that the 2.4/2.8 heads will rob power torque lower down, is this true?
  7. A

    S4 B5 TTE600 MRC stg 3

    Looking forward to having this power soon
  8. A

    PLEASE HELP NO CLUTCH

    There should be a u clip to hold the pipe on, it slots into the plastic part of the slave cylinder then the pipe clicks into place, it's more than likely the clip has corroded away and the hydraulic pressure has blown the pipe off, not sure if you can get the clip separate,everytime I've...
  9. A

    B6 2.7 Twin Turbo B5 Engine Swap

    Sorry for the lack of replying, adapters are from eBay billet alloy, I've torqued them and marked them for movement as I'm also nervous about them, so far nothing to report and I often kick the crap out of the car [emoji16]
  10. A

    B6 2.7 Twin Turbo B5 Engine Swap

    Thanks very much, yes please share away
  11. A

    B6 2.7 Twin Turbo B5 Engine Swap

    New look RH ALURAD 18" 8.5 all round with et 52 5x130 with 20mm adapters takes it to et 32...
  12. A

    B6 2.7 Twin Turbo B5 Engine Swap

    Sorry for late reply but no I'm keeping the immobiliser if I can
  13. A

    B6 2.7 Twin Turbo B5 Engine Swap

    I've had the s5 350mm front brakes for a while, but they overheat fast as the rears are stock... I know! So I've bought custom drilled discs, porsche style, 350mm front and 300mm s4, got new s4 back plates, s4 caliper carriers and new rs4 calipers. I'm ditching the steel rear knuckles in...
  14. A

    B6 2.7 Twin Turbo B5 Engine Swap

    Thanks bud, where abouts are you?
  15. A

    B6 2.7 Twin Turbo B5 Engine Swap

    Yea it is, cast iron but can take well over 500hp on stock internals!
  16. A

    B6 2.7 Twin Turbo B5 Engine Swap

    Yea the 3.0 has a alloy block, so use 2.7 heads with 3.0 litre or visa versa had been done, it's not the power that's a issue but the torque, lots and lots of it!
  17. A

    B6 2.7 Twin Turbo B5 Engine Swap

    It's not quite, it's got a lovely burble and when driving around like normal, on boost its a different animal! As for the downpipes, parts aprox 100 quid Or you could use a combination of 3.0 and 2.7 and make a hybrid 3.0 Turbo...
  18. A

    B6 2.7 Twin Turbo B5 Engine Swap

    Well the weather has been getting better so i dealt with a few issues,the front wings were rusty so replaced them and had the front end repainted with some extra stuff to do at a later stage The additional switch for the AC was leaking so i replaced the condenser and made a y joint...
  19. A

    B6 2.7 Twin Turbo B5 Engine Swap

    Hi sorry for the late reply,the B7 is just a facelifted B6 so yes it can be done!