Great post !
Works well.
Just to add, you must activate the Sub Gain bit in 0x3000 as well as the first byte to enable the option.
Otherwise you will see the sub level activated on the MMI but it wont do anything to the sound :)
Hi all
Has anyone upgraded the 6.5" subwoofer speaker in the existing B&O casing?
Current spec of the speaker is 100+100w 8ohm+8ohm
Looking for a suitable replacement to upgrade in situ
Thanks !
For anyone doing this on the following controller
5Q0614517CG
Existing coding was
Byte 8 = 89 - new value 8B
Byte 19 = 91 - new value D1
Byte 23 = 72 - New value 73
Byte 25 = 21 - Value unchanged
These were calculated by making the following bits active (1)
Byte 08 - Bit 1
Byte 19 - Bit...
Planning to retrofit front parking sensors to a 8V
What is the preferred method to route wiring from the bumper to inside the cabin?
Options Ive seen is behind the battery through the firewall grommet, or from drivers side.
Any retrofit guides out there please?
Thanks in advance
Thanks
Yes ive seen the generic ones
After a bit more searching the following VAG ones also exist:
5G0919491
5g0919493L
1S6919492
5E0919485A
Useful to know for anyone else doing the same.
Hi all
Does anyone know what PDC sensor bracket to use on the front 8V bumper? (the bumper pdc holder not the grill pdc holder)
Listed on ETKA as no 13 but not a part thats available seperately
Can adapt a generic one but was hoping to get something made for the job
Cheers
Hi all
Currently have rear PDC from factory on a 8V FL
Understand noone can activate the PDC display on the MMI, other than Hazzy Dayz which requires a replacement module.
If a rear view camera is installed, will the rear PDC Display be shown as well as the gridlines of the camera?
Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.