Search results for query: *

  • Users: Gops
  • Order by date
  1. Gops

    Bringing my TQS back to life!

    Thank you Sandra! Well good news is it passed the MOT!!! Car was fantastic getting there and back, power felt good, I need to check for leaks though as I think I have one or two leaks somewhere… I’ve taxed the car and was about to take it for a spin, but white smoke and coolant was the...
  2. Gops

    Bringing my TQS back to life!

    Thanks Sandra! Few updates on the car, so the electric windows was baffling me as I bought some fuses which did nothing. So I started to understand how the system works and in short, everything runs off the drivers side door switch. The window kill switch has a 12v feed from the CL pump which...
  3. Gops

    Bringing my TQS back to life!

    Good evening all! So it’s been a right weekend! It started off with trying to get the car ready to start back up. Getting everything worth such as the exhaust and cat back on the car after doing the gearbox. Honestly it was such a pain in the **** and I give people dues for doing that job...
  4. Gops

    Bringing my TQS back to life!

    Thanks Rav! Come down to see it one day! Had such a long weekend on this car. Dad and I started to remove the gearbox a week or so ago, and on Saturday we managed to remove the gearbox with great effort to reveal a complete **** up of which was my fault! It’s clear as day it’s coming from...
  5. Gops

    Bringing my TQS back to life!

    Good evening all! So from the last post, the engine was started and worked! It settles nicely now, idle does fluctuate but I think there may be a few air leaks which I can sort later. The bigger issue was the oil leak which I believe was the input shaft seal on the gearbox. I can’t remember...
  6. Gops

    Bringing my TQS back to life!

    Thanks bud! I’ve had a right weekend with the car. Last night it ended with the car looking like this: Managed to get the whole car piped up ready to get the exhaust on and the front end on. The exhaust ended up being a right little pain but my dad did that all by himself, so kudos to him for...
  7. Gops

    Hibiscus Red TQS - New Car, New Project, cars been here before though.

    Car looks mint mate! I hope you feel better as well bud! Sent from my iPhone using Tapatalk
  8. Gops

    Bringing my TQS back to life!

    Good evening all! I hope you are having a splendid NYE! Done quite abit today, managed to find the alternator link lead and fit it to the starter. Should have done that when the engine was out really because it was not easy to fit! Next was just a task of wiring everything back up. It was a...
  9. Gops

    Bringing my TQS back to life!

    Good morning all! I hope everyone has had a lovely Christmas. I’ve done some work on the car during the holidays but not much. Both front shafts are back in and the prop is also back in The only issue is getting that gear linkage back in, but I’ve misplaced the fixing for the stabiliser rod...
  10. Gops

    Sandip's Silver TQS

    It’s pretty difficult but I guess not impossible to put something decent behind the bumper. I’ll have a look when I get to that bit and see if it’s worth doing. Failing that there is always WMI Sent from my iPhone using Tapatalk
  11. Gops

    Bringing my TQS back to life!

    So, the new reservoir is here with the breather pipes and coolant pipes. For those who don’t know, I have a new radiator which I bought some new pipes and a temp switch which felt right. We’ll see how these keep temps consistent from the OEM one. My dad has already built the rad pack back up...
  12. Gops

    Bringing my TQS back to life!

    Thanks Rav! It’s getting there, and dad loves snacks whilst I work haha! Been getting on with bleeding the clutch. To which it worked well a part from when the brake reservoir burst! I wasn’t using more than 20psi but I think when I change this. I’ll use 12-15psi when it’s done so had to...
  13. Gops

    Sandip's Silver TQS

    Hi mate! Car looks mint!!! For a FMIC, it's hard to say because not much fits behind the OEM bumper. Most people use S4 bumpers which have loads more room but I don't think it suits a normal looking A4. I did look at a charge cooler in place of the SMIC and using the coolant straight out of...
  14. Gops

    Bringing my TQS back to life!

    Good evening all, It’s been a while, but I’ve made a little more progress on the car. Engine and gearbox have been mated: The turbo had no studs fitted so i got some off eBay and got the hot end fitted to the car, since it’s extremely difficult to get that done when the engine is back in...
  15. Gops

    Bringing my TQS back to life!

    Good evening! So this weekend not much has happened. I’ve Managed to get the coil pack wiring former fitted: From there I wanted to get the flywheel and clutch fitted to the engine: I did try get the both together but it was a little Difficult without any help, so will leave that til next...
  16. Gops

    Bringing my TQS back to life!

    Good evening ASNers! It’s been a little while I’ve updated this thread. I’ve been pretty busy with life and work but I’ve made small progress on the car. The first being coil pack wiring harness. I bought it from the states as no one sells them here anymore. I had to cut into it as it’s made...
  17. Gops

    Hibiscus Red TQS - New Car, New Project, cars been here before though.

    I hear you mate; I feel the same sometimes, but I keep looking at the car and thinking I can't stop now and need to get it to a mint stage. I saw a normal 1.8 for sale for 3k the other day so these are definitely going up in value!
  18. Gops

    My minor modding thread

    Looking lovely as always PT! I looked into this 8P rear diff thing back when I had my S3, although short lived but packaging wise it looked like it fits. Not sure on the Haldex controller but worth a punt! Sent from my iPhone using Tapatalk
  19. Gops

    Bringing my TQS back to life!

    Thank you both! The car is coming along slowly, I hope one day it’ll be as clean as Midas’ car! Done a little more this weekend, started off with the rear diff, filled it with oil and fitted new fixings to the fill and drain holes: Did the same with the gearbox as well Then we started on...