Search results for query: *

It was lowered 20mm and has 20mm spacers rear and 10mm front.

Here´s my old car that has FMIC. Pic1 Pic2

My friend has MTM 345 S3 and I have MTM 265 S3. We have tested performance differences many times and if we start accelerating from 80kmh he has gained about 30m gap when we hit 250kmh. He has more turbo lag than my car so when accelerating in slow speeds there is not much difference. When...

Is there any other brand that makes poly bushes for S3 than Powerflex?

My suspension is started to make these squeking noises so i think that my bushes are worn out. Do you recommend original VAG bushes or Powerflex ones? I do maybe 7-10 trackdays in year so suspension is little bit more under stress than normal day-to-day driving.

Color code is LY7W.

No there is no scrubbing even at track on heavy cornering. In front I think that 10mm is enough because then wheel is same level than car body. Now i got my wheel few mm´s over... My wheels are 8.5" wide ET35.

Rear one´s are from Powertech and fronts are custom made. I used 20mm longer bolts and shortened those ones for front wheels about 8mm. http://www.powertech.de/

Here´s 20mm rear and 12mm front. pic I wouldnt like to use that wide spacers in front but i need to because there is not enough clearance with those CH´s and my Porsche calipers.

Those were taken by my friend and he has Canon EOS-5. In those wheel pics there is used fisheye lense.

Here are few new pics of my car... click

[ QUOTE ] Got a reply from them yesterday. They basically said that they were developing one but they could not confirm a completion date. [/ QUOTE ] They said me the same thing 4 months ago when i asked those manifolds.

Yes they are at the top, because i swapped places between bleed nipples and pipes that connect cylinders.

14mm and there is about 3mm cap between wheel and caliper...

I have those brakes now fitted. I followed S3bow route and machined those rotors so those fit better with these calipers. I also painted those rotor middle parts.. Brake performance is improved a lot compared to those brembo´s that i use to have. I havent took those to track yet so can´t say...

There is Airbag-warning light in my dashboard and i looked fault messages with vag-com and there was: 1 Fault Found: 01218 - Side Airbag Igniter: Passenger Side (N200) 32-10 - Resistance too High - Intermittent Then i removed seat and looked those seat wiring and those all seems ok. What...

My friend has 9,5" rims in back and there is much space with those. So i don´t think that there are any problems with 10".

Those are 996.351.430 and 996.351.429

Today I tried first with 10mm spacers and wheels scratches a little bit with calipers. Then i tried with 15mm spacer and then there is about 4mm space between caliper and wheel spokes. Thank god it fit! Now i have all necessary parts for fitting those brakes except wheel spacers and longer...

[ QUOTE ] No, not made the discs smaller , but you'll notice from the picture you posted that the pad doesn't reach the inner part of the disc. So I machined it out to within about 2mm of the pad. Only about 3mm. [/ QUOTE ] What is the reason that you machined it? Is there some gains with...