Search results for query: *

My A4 b7 2008 n/s headlight - dipped beam has started to switch off after a few minutes of use and comes back on after switching off and on again. Same symptoms occur. The headlight is Xeon and is adaptive (has full motion up/down/left/right) Can you advise on part numbers for parts that...

Can someone advise if it is possible to make the rnse and aux power/cig lighter only power up with ignition? currently it is permanently powered without ignition. also is it possible to get new firmware for my rnse as I have new maps disk but rnse won’t read it? any help is greatly...

<br> <br> My original unit is 8EO 959 433 AH and thought the replacement part for this the AJ (ETKA). Didn't know anything about reprogramming? Can we do this in VCDS Lite? If not will like for like for like AH replacement do without any reprogramming? Thanks in advace Grover

Hi Has anyone got a working CCM 8EO 959 433 AJ to replace a possibe faulty unit which is bone dry but displays the symptoms of a faulty unit. Please beaware that the budget is not great. Any help on the matter is great. Thank you Grover

Scanned after clearing all DTCs VCDS-Lite Version: Release 1.0 Sunday, 15 January 2012, 22:58:00:0 Chassis Type: 8E - Audi A4 B6/B7 Scan: 01,02,03,08,09,0F,11,15,16,17,18,36,37,45,46,55,56,57,65,67,69,75,76,77 -------------------------------------------------------------------------------...

I have scanned it and the fault changed when I scanned it. I will try and post the latter scan. Thank you Grover

Hi could anyone advise regarding a fault with my A4. The alarm has been going off, the rear doors remain shut (despite trying to open them from the inside and out), Interior lights are on and off and central locking has a mind of its own. These are just some of the faults which are all...

An absolute superb writeup. I had a case of fan not working, checked fuse #25 30A which was OK. Then I checked the motor supply again this was fine and in conclusion together with this post I ordered the brushes from Egay £7 in order to replace them. They arrived in two days and replaced the...

Hi Griswold, I bought the same type as you ++http://www.ufodiag.com/ProductPicture-china/th/Airbag-Vag+Airbag+Reset-149-0.jpg++ Looks to work but fails after the amber light. There is also a com port on the programmer can I use this to possibly update my unit? I would upload a picture but...

Hi I used VCDS lite to diagnose this airbag fault on my A4 Avant TDI. The module on board is the Bosch 8D0 959 655 J (Bosch 0 285 001 276). I have purchased Vag Airbag Reset Tool and I used this to clear the error and to my horror this does not clear the fault. The tool has a com port what...

I have a petrol 2.0 A4 B6 2001 and have unfortunately fallen into the trap of Servo failure due to water in the Plenum chamber. I now have to replace the servo. I was thinking of a second hand servo. Could someone please advise which servo (part number) fits mine and I would prefer to have one...

Cool thanks for that. Gonna use this forum and a well known repair manual to attempt it. We will have a running engine at the end of it or a few bent bits. Any help is appreciated Grover

Hi I'm gonna attempt the timing belt on my a4 avant 1.9tdi ahu engine. please could someone advise what tools are required and any tips. thanks in advance grover