Search results for query: *

  1. R

    Cant switch hazard lights off...

    Ill have a look, but i doubt this will cure my problem. Were your hazards staying stuck on whilst engine was running also?
  2. R

    Cant switch hazard lights off...

    Again, what would a green tinge indicate? I pinned T32/15,16,17 (blue plug on instrument cluster) pins out to T32b/13 ( Grey plug on CEM) And T32/16 (blue plug on instrument cluster) pins out to T32b/12 (Grey plug on CEM) Pins 12 and 13 on the cem is high and low can bus, I don't if that has...
  3. R

    Cant switch hazard lights off...

    Done abit more work today, managed to get the flashers turned off.. However, ive only been able to do this by snipping one of the wires on the green connector on the back of the clocks, this has turned the indicators, handbrake light and full beam and head light lights off the cluster aswel but...
  4. R

    Cant switch hazard lights off...

    I haven’t replaced the alarm siren yet, I didn’t think that would cause many issues? I have switched the alarm system off now and they’re not flashing quickly anymore… Im not overly fussed about having no alarm at the moment. I have removed the grey 32 pin from the CEM and that stops...
  5. R

    Cant switch hazard lights off...

    Thanks for taking the time to research those codes for me I appreciate it. I should add, that I cleared the majority of them after I ran that initial scan and a lot of the faults might be because I’ve unplugged different control modules and the clocks before running that full scan… It was...
  6. R

    Cant switch hazard lights off...

    yea thats the first thing i always do and then i research it. but i cant really find much tbh on those codes. To be fair i clear them and they go but then they come back again once ive left it a few hours or if i turn over the engine
  7. R

    Cant switch hazard lights off...

    cleared codes about a million times but these are the ones that keep pop up. and yes i have turned the complete alarm system off now and it seems like i am getting somewhere now, but hazards are flashing normally when engine is running but i cant switch them off...
  8. R

    Cant switch hazard lights off...

    when i unplug the 10 pin connector on the CEM it stops. I have sinced switched the entire alarm system off and now it seems to have solved the constant flashing when the ignition is on.. But now the hazard lights stay on when the engine is running and the hazard switch is dimmly lit when...
  9. R

    Cant switch hazard lights off...

    i have never taken a car to a garage since ive been driving and i dont want to start now... I think i have come to a conclusion of switching all the unnecessary functions off in the CCM as i believe everything is switched on as standard and this is where all the alarm functions are stored i.e...
  10. R

    Cant switch hazard lights off...

    UPDATE: I have bought a new CEM but still hasnt sorted it and bought a new set of clocks and this hasnt worked either. Bought vag tacho 3.01 and i can not get it to read the info in the clocks, just says software version unknow - access denied. Anyone got any ideas?
  11. R

    Cable operated hose clamp pliers in the UK?

    i got mine from snap on, handy bit of kit as those clamps are a pain to get off!
  12. R

    Cant switch hazard lights off...

    ok, so your thoughts are with the alarm causing the indicators to stay permanently lit? I always thought that the alarm turns off after a while and this does that but then comes back on as soon as you start it or open the door, i guess thats the whole point?
  13. R

    Cant switch hazard lights off...

    Thats what i am thinking and the alarm siren looked knackered when i took it apart so couldn't tell if alarm was going off or not, i am going to replace batteries on that and see if it gets the alarm working. One of the faults i got on vag com was saying alarm activated by door contact or...
  14. R

    Cant switch hazard lights off...

    already tried re syncing keys and it doesnt do anything... think the key needs pairing to the cluster in order to get the central locking working. Im not overly fussed about central locking not working, just want to get down to why the hazards keep flashing, but they dont flash at the same...
  15. R

    Cant switch hazard lights off...

    I was thinking it could be an alarm problem, i have removed the alarm siren and the batteries had leaked and gone all over the PCB, i have cleaned it off with ipa and i am going to do the AA battery repair on it later today. Although i think with regards to the central locking not working, i...
  16. R

    Cant switch hazard lights off...

    I found your thread the other day and thats why i started looking around the CEM (J519 as vag com knows it as) the hazards stop flashing when i unplug either the 10 or 32 pin plugs on it, but then it stops all of the outside lights and window wipers from working aswel, however, when i plug it...
  17. R

    Cant switch hazard lights off...

    Ok ill check that later today, should i check all of the doors wiring? Alot of water also comes out from the bottom of the drivers side back door when it has been raining, not sure if its worth checking behind the door card to see if it has fried anything? i think you could be right with the...
  18. R

    Cant switch hazard lights off...

    where abouts is this wire? would this wire be causing my hazards to stay on constantly? they go off for abit until i shut or open the door or start the car. The CEM was from a b6, exactly the same apart from his wasnt a quattro and was a 52 plate and not 03 like mine... I have used vag com and...
  19. R

    Cant switch hazard lights off...

    i have replaced the CCM under the passenger seat and tried another CEM from a friends car, however, his one had fewer pins than mine his part number was 8e0 907 279 j or q and mine is 8e0 907 279 e but this didnt seem to make a difference anyway. and no the central locking doesnt work off the key
  20. R

    Cant switch hazard lights off...

    I have recently purchased a 2003 Audi a4 1.9tdi quattro, however the hazard lights stay on even when the keys arent in the ignition. Also the central locking isnt working off the key fob and i have the immo light flashing The things i have done are: New (Second hand CCM) and coded in - i...