Search results for query: *

Here is an example of the TT exhaust that is the same at the front : Also does anyone know if Milltek do a resonator bypass for the 3.2 - I couldnt find it on their website? Cheers

I picked up a cat-back Milltek, and while fitting was surprised to notice that the car has two additional silencers that are in-line with the cat's - they appear to be a fixed part of the car assembly. Has anyone ever removed these (by cutting I assume) and had link pipes made up? I suppose...

Cheers Tom, Ye Im taking the car on holiday next week so didnt want to break anything! I'll attempt the dics/pads again when I get back - maybe saturday morning so Audi are open incase I break somehing! Any pics would be great - but dont go out of your way. thanks again

Hi Tac, Thanks for the info. I guessed it was the 'guide' bolts under the caps - I undid them - but couldnt remove the damn clip! Does it just come out towards you (away from the caliper)? Regarding the jacking points it seems a lot of people use that method - but where do you place axle...

Just a quick one - where do people jack up the 8P A3 (or the Mk5 Golf). All the ali suspension parts scare me - and I dont wan to use the sill point without a converter for the hydraulic jack. Any pics and info greatly appreciated. On the subject of the 3.2 front brakes I have a couple of...

Hi, I installed a genuine cruise stalk from Audi - I didnt run the extra 'cable' to the bulkhead as this car is a '56 and I didnt think they need it? (I had to run the cable on my 2004 3.2). I coded the SWC using VCDS and it accepted the coding for 'cruise but no o/b comp'. I can see the...

Hi - the SWC took the coding for cruise - saying coding 'accepted' - and when I look at 'measured values' in VCDS I can go to the group that includes cruise, and it registers the button presses etc. Its the engine module I cant configure. I found an old thread on the VCDS section which...

From my research the 1K0 953 549 AH does support it (I must admit that initially I didnt think it did). I have coded the steering wheel controller up for cruise, and the functionality has been tested using measuring values in VCDS. My problem is activating cruise within the engine module -...

Hi all, I installed cruise on my A3 last year with no probs. I recently installed the hardware for a colleague, and upon trying to activate the cruise by loggin into the module with '11463' got the following error: VCDS Login Invalid 'Login Code not Accepted by Controller' I have tried...

Hi all, I installed cruise on my A3 last year with no probs. I recently installed the hardware for a colleague, and upon trying to activate the cruise by loggin into the module with '11463' got the following error: VCDS Login Invalid 'Login Code not Accepted by Controller' I have tried...

I must admit I was concerned about quality of eBay discs. What pads do people recommend for the A3?

Following on from my other post, I have seen numerous sellers of Audi brake parts (for example:http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=180462990233&ssPageName=STRK:MEWAX:IT ) I wanted to know if anyone has any experience or any recommended sellers on ebay for parts? Also are the...

Hi I bought the car a year and a half ago - and dont have any receipts for discs/pads - so I dont know unfortunately. I bought the car at 59k - and its got 71k now. The discs have a small lip on them - so thats why I need to nkow the minimum thickness - as they might not need changing for a...

Hi all, Ive searched the threads but cant find an answer to this! My 3.2 front brakes are looking a little worn. My question is what is the minimum thickness for both front and rear disks and pads? (I dont have a manual for the car). Finally, if I do need disks ill get them from GSF as...

Hi 40k service for A3 3.2 Quattro DSG (its a 2004 at 72k - AVS due in 3000 miles) Portsmouth Audi/Southampton Audi - price matched each other (although Portsmouth were about £80 more expensive initially). Ive managed to get it down to £250 because I told them im not paying £110 for spark...

Thanks for the assistance. The cruise is now all working, had to code the controller and the engine ECU, and it all works. If anyone is in a similar situation and needs help give me a shout. Thanks Martin

Hi all, Following on from my previous post regarding the ECU removal! I have successfully installed the new stalk. However, after looking at the wiring harness on the steering ECU, I noticed the pin 13 isnt populated. I believe this is where the repair wire need to go? My car is late 2004...

Thanks Neil. I read your original post regarding your fit, but still couldnt figure it out! Now Ive seen the picture it makes more sense. I was pusing towards the dash, but now I see its across to the passenger side!!!! That will make a massive difference. Its certainly a strange set of...

Hi all, I've finally bought the bits to retrofit cruise to my A3. My problem is I cant remove the steering ECU. I got all the other bits off. Ive removed the torx screw. Ive removed the rear connectors, and unclipped the rear mount. I followed the procedure to use a drill bit to release...

cheers - i think id read your previous post about this - which gave me the idea. With my old VR6 I used to change the oil every 6 months - but on the new engines i think yearly is good enough - two years is mental! One question - does the oil filter kit include the seals for the 6mm hex drain...