Fitting a replacement airbag ECU has solved the problem. Thanks to Unit 20 on the Wirral for finding a second hand unit, coding and fitting.
Sent from my Moto G (5S) Plus using Tapatalk
The fault code is B100811 - PASSENGER LEFT REAR SEAT BELT IGNITER SHORT
CIRCUIT TO GROUND .
This part is only fitted to usa cars , car doesn't have any wiring
from the the control unit to the n/s/r seat belt .
Part number has been checked , svm has been carried out , all unit's
have been...
Thanks for response. I don't have the code from the garage, but they told me it related to the rear passenger side seat belt tensioner. I will see if I can the code.
Sent from my Moto G (5S) Plus using Tapatalk
The airbag warning light came on, when scanned by garage it came as left rear seat belt tensioner. Stripped back to repair and found that car does not have this fitted. Checked wiring diagram and this is only fitted North American spec cars but this is an unmodified UK spec car. They have tried...
The airbag warning light came on, when scanned by garage it came as left rear seat belt tensioner. Stripped back to repair and found that car does not have this fitted. Checked wiring diagram and this is only fitted North American spec cars but this is an unmodified UK spec car. They have tried...
While the car was in for MOT the garage removed the original exhaust tips. I could then slide on the oval replacements. Looks ok and what I wanted.
Sent from my Moto G (5S) Plus using Tapatalk
One of the more expensive installs but worked fine in my 2016 Allroad. Not too difficult to fit and I installed camera at the same time.
https://unique-ad.co.uk/?gclid=Cj0KCQjwl9GCBhDvARIsAFunhsnYzA05HnKRnRglxK7vVKFuitXDJS3wzY7YaHY2jtVBu0-OnuPU8ksaAl_QEALw_wcB
.
Sent from my Moto G (5S) Plus...
No, there are three serious welds holding them on, I have not managed to get them off yet. There is not enough room to get a big cutting or grinding disc in, while under the car in the driveway. Open to suggestions.
Sent from my Moto G (5S) Plus using Tapatalk
I bought the e-tec dynamic from Demon Tweeks which looks like it will fit ok once the original trim is removed. Unfortunately I am struggling to grind off the welds for the original so have not managed to try and fit. Any ideas to get the original trim off welcome. The other option is to buy a...
Looks like nobody has done much on this. I have been looking, the existing s/s trim has a flat bottom as does the main exhaust tip underneath. Making it more difficult to find a replacement. The width is 115mm height 89mm meaning it need something about 4.5 inch wide. The existing trim is welded...
Hi, has anyone, changed the exhaust tips to the RS style oval on Al Allroad? It looks like the chrome will come off but the silencer pipe also has a flat bottom so may look strange if just fitting a replacement tip of different shape.
Sent from my CPN-W09 using Tapatalk
I am looking to buy a boot replacement button with the reversing camera. Does anyone know if this will need a relay or can it be directly clipped onto the reversing light power supply for its 12v feed. Thanks read lots of posts but most don't show how to wire it up to power supply.
Sent from my...
Hi any ideas on removing a dent in the aluminium trim on the centre console by the gear stick. Suspect I would cause more damage removing the trim to push it out.
Sent from my Moto G (5S) Plus using Tapatalk
You might like this post
https://r.tapatalk.com/shareLink/topic?url=https://www.audi-sport.net/xf/threads/ajs-allroad.377655/&share_tid=377655&share_fid=2376&share_type=t&link_source=app
Sent from my Moto G (5S) Plus using Tapatalk
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.