Search results for query: *

Try this: http://www.audiusaparts.com/audi/a3/8v0947157a/2015-year/tdi-premium-trim/2-0l-l4-diesel-engine/body-cat/console-scat

This video is helpful in showing the tape trick but the way the lower aluminum piece is removed from our shifter is not the same. You just need to pry ours off with a screwdriver around the seam where it connects to the rest of the knob.

I'll start off by saying it's pretty tricky to reset. You have to 90% disassemble the shifter - carefully - so that you don't scratch or dent any parts. You need to use some small flathead screw drivers or better yet, some stiff plastic trim removal tools to pry each section apart. I followed a...

Any updates on how the new (V3) software is working? I've settled on the V2 2+2 as the smoothest for day to day driving with lots of punch if needed. I'm running 92 octane (US). I've noticed that 2+3 and 3+3 give the DSG clunky shifts in my car. Maybe a bit too much torque for the stock DSG...

Actually bought it off another forum. Some dude that got it straight from a dealership...so maybe the parts guy there included the wires and connectors and they aren't actually included in the package..?Here is what the wires look like:

kc1174 - Mine came with two wires with pre-soldered plug ends and a plastic connector that they snap into. The plastic connector fits into the socket on the rings you show in your photo. See below for the part number and picture of the connector before snapping the wires into it. I don't know...

I'm in the U.S. - Oregon actually.

No problem- the part number for the rings is: 8V0 947 157 A. Looks like a few places sell them now on-line.

For future reference - popping the center console off is actually super easy once you've done it once. The trick is locating a gap on each side (they about even with the MMI knob) and pushing wedges into the gap until you feel the clips release. Then you just lift the whole thing up with your...

Thanks - you're correct - all the warning lights went out after a short drive. Took a while and a bit of Internet searching to figure out how to reset the DSG knob button. There are a couple of YouTube videos out there that help. All in all this was not the easiest of installs for a seemingly...

Got the lights installed today. Took about 1/2 hour to figure out how to get the center console off and another hour to get the LED unit installed into the console. Involves cutting off lots of plastic glue tabs that hold the textured plastic overlay to the base of the main console. Not really...

This thread is pretty old but I'm curious if anyone else has tried this install...? I have the parts but haven't tried to remove the console yet (2015 S3). Does anyone know where to plug the wiring into to get power to the LED rings?