Separate names with a comma.
i had a cold start problem on mine, that went away when warm,turned out the cambelt wasnt fitted correctly
i was told its only cars with siemens injectors
my car is a 2005 and the replacement modual came off a 2005 so should both be the same gen
ok the haldex i removed had 1K0907554A and the one i fitted has 1K0907554C on it,could this be an issue maby C is slightly older and not compatable...
ok i had this error coming up
Address 22: AWD Labels: None
Shop #: WSC 00000 000 00000
4 Faults Found:
i get 53mpg cruising at 60mph for 45mins in my a3 tdi quattro,car needs the injectors repairing though soim hoping it will go up once iv done that on...
did you fix the fault with your haldex,i have the exact same problem with mine and am not sure how to fix
16 inch oz polaris rims removed from my 2005 a3, 5x112mm pcd
£120 plus £15 postage
ok so iv got an 2008 Audi S3 rear sub frame with diff, hubs, calipers, arms, driveshafts and bits,no idea what the parts are worth but if you let me...
audi want about £20 per injector and its only two rubber seals,must be able to get them cheaper somewhere else
iv checked the fuel system for any oil residue and there is none in there.
the car has never been remapped that i know of,on the pistonheads forum...
well just as it gets that i really need to make use of the fact my car has AWD it starts playing up,light came on last night so got the codes of it...
that was my first thought a leaky valve seal or injector but its not an overnight issue,if i start the car leave it running till it clears then turn...
is there anything else you think it might be,i did already have injector 1 changed with new seals
so what issues did your car have when the cam went,
Car is a 140bhp tdi audi a3 with a BKD engine
The problem is bad smoke on startup (its definatly diesel smoke)
will smoke badly on cold...
does that cam look ok,still not found the problem with the car so wondering if it could be the cams
when you turn the ignition on how long should the lift pump go for,iv just tested mine by pulling a pipe off and putting it in a bottle and when i...
iv just checked and when its totally cold from first start cyl 3 is like it too and cyl 4 compensating
cyl 1 cyl 2 cyl 3 cyl 4
2.99 -3.01 2.79 -2.78
ok i changed the injector loom and that didnt fix it,i also did a compression test and that came up ok,
what else could it be that causes the...