Search results for query: *

can I heat and expand the vent cut out with a heat gun?

Thanks for the feedback, NHN - always appreciated. Indeed, I selected : A3 New Style Vent, 2004-2011 A3, CN ...just following up. I thought the only difference is they grind the sides for me so I dont have too.

its this bit that protudes outward that is too big to slot into the event:

so the cutout in the dash is 24cm and the vent is 28cm. I'd need to trim all the way round 5mm. There wont be much plastic left, so may as well cut it

So, should I sand down the sides or cut the black plastic off?

Nice! As I've removed the mirrors before that'll be fine. The actual bits I will need doing is the VCP and well....the heating sensor in the seat on the drivers side :scared2: As for the vent, hmm not quite the same as the 8V either. I cutout the inner ring on the dash and removed the rubber...

I havent gotten that far yet...slight fitment issue

device in question:

https://www.aliexpress.com/item/1005005292975637.html?spm=a2g0o.order_list.order_list_main.5.21ef18024P0AX4 its these ones:

Hi All, I've purchased some aftermarket LED vents which requiring an ignition live + ground connection. The unit controlling the lighting/power to the vents will be housed behind the head unit. Whats the best approach here? Shall I splice into existing ignition live wire/ground wire or run it...

I have the door modules ending in 'P' so thats no worries. I can always come to you for the VCP. The last bit then, I definitely want the MY11 - shall i contact you on whatsapp for prices? Assuming you can source them?

Hi All, I am looking to retrofit power folding mirrors to my A3 60 plate (2011). I have a few questions: 1/ If I'm looking to have the folding/unfolding done via lock/unlock do I still need the switch? 2/ Is there someone I can contact regarding VCP coding to activate folding via lock/unlock...

Hi All, I've got a few bits to sell: https://www.ebay.co.uk/usr/harbans11 Audi A3 2010 8p S-Line 2.0l tdi - SCUBA Blue Listed on ebay: - both rear doors - bonnet - undertray - rear boot lid - interior lights Not listed yet: - front bumper with aftermarket rs3 grille - rear bumper (dual...

Answering my own question, its: WVJ - Soul (Black)/Magma Red

Hi All, I'm looking to spray / refurb my leather seats. Does anyone know the paint code for the red for the red/black leather seats - these are electric/heated if that helps. Thanks in advance.

Soldered the wires together and placed into a single slot as per OEM - still blows the 10A fuse when sliding the seat back/forth or raising it up/down.

Hi All, So, I've managed to fit the electric / heated seats. The issue I am having is on the passenger side, when I slide the seat to either end the 10A fuse blows, the same happens on the drivers side where I raise or lower the seat and the fuse blows. What I noticed is, if I use a 15A fuse...

Manage to release the pin - for anyone else: insert a hair pin into the holes/gaps either side and then yank. It'll release the pin. I tried with a few other tools made specifically for this but no dice, surprisingly a hair pin worked. If you want the repair wire part no: 000979 406E

I ended up buying another 40 pin connector as imaged above. Any thoughts on how to unlock it to remove the pin? @NHN :)

So, the pin I need is T40/2 : Whats the part number for it?