Separate names with a comma.
You can pick up a front transfer box from fleabay for around £300, BUT, I would take it to a proper VAG specialist before spending any money. Speak...
DS2500 will be a good match for stage 2+
http://www.mrctuning.com/ get my vote. Leave the Superchips file on and you will get a before and after dyno report, so you will be able to see the...
I tried some high performance gearbox oil a few years back and it also made the gear changes notchy when cold. Went back to Audi oil and the problem...
I can recommend TA Alloys http://www.taalloys.co.uk/18-1
I'm afraid grip and noise go hand in hand in general.
This also applies to tarmac - the noiser the road surface the more grip it provides.
What you probably experiencing is that it is reacting immediately and shifting to the lowest possible gear, then hitting the rev limiter and shifting...
The non-res system drones at motorway cruising speeds IIRC
Looking at the damage to yours, his radiator must've taken a good bashing, so he wouldn't make it very far IMO.
Not going to work unless youve got an AV input adapter for your OEM headunit (or an after market headunit).
Looks a lot better! Is that a new mesh grille or did you re-use the original? Looks a bigger mesh that's all.
As has been said before, MRC Tuning support both Loba and TTE upgrades and can reduce peak torque if you are concerned about that.
Maybe the water got into the DPF sensor wiring - sounds possible if it's been fiddled with, no?
The std airbox does a relatively good job of keeping IATs down - you definitely need the heat shield in these temps. Did you measure your IATs before...
I had over 24k out of a set of PS2's so something is amiss.
You need someone with VCDS to log the boost & MAF readings.
40k for oil. No filter on Gen IV Haldex (2009 on) according to ETKA.
Try putting your old wheels back on. Very possible to become tail happy by changing to cheap tyres as I noticed the same when cornering on my winter...
This is for the K03 tfsi i.e. non-S3 as I can't see the pipe that links to the DV?
I agree, but how difficult is the wiring to the mic? Where is it located and where does the cable run to?