thats ok mate. no worriz. thanks.
thanks. i think i understand were you mean. and expect the other 2 red wires are the 2 that connect the 2 large fuses that are under ther. with 1...
yeah mate a pic would be great. i dont mean inside the ecu box thats were the red wire comes from onto the bit with the 4 plugs etc. but ther is...
crimp point ! i think this is in the ecu box above. i mean the red wire with the black tape on connected to the flip side. thanks.
do you know were the other red wire goes to from the flip side of the 1st. should it be on some fuses inside ecu box. thanks
hello.neil thanks for your help. ive sent more messages to you but not sure if done correctly. so i just want to say nice 1 mate.
thankyou for all your help so far. nice 1.
hello. thanks for the pics neil massive help. if you could tell me where the red wire connected to the other side of the 1 comin down into car...
does anybody have any photos of the a4 b6 3.0 ecu wires. from the box under bonnet to the inside of car. and any pics of the wires coming of the...
do you know which wires go onto the ecu/fuel pump relay. 167. thanks
ok. will give that a try.
any idea how much that would cost ? cheers
do you know anything about rear brakes. ive just changed rear pads and now the handbrake wont let go of the calipers.and my clutch just went for...
not if ignition barrel is changed. also the old key wont have correct transponder code . if im thinking right.
need to release brake somehow. cant tow it like this
clutch has just let go now . good job im outside my house at least.
will i just need to use no1 tool (hammer!) on em. could i have tightened anything to tight. only removed 2 13mm bolts on both sides to do job.
handbrake was of mate. both bottom sliders on each side were dry. top 1s wer ok. used copper slip on em. all 4 were sliding ok before putting back...
handbrake of ! chock under front wheel.
no.didnt touch cables at all. just removed caliper wound piston back new pads in replaced caliper. and thats all.