OSIR does vent holders for 52mm or 60mm. I have a 60mm defi gauge in my vent without a holder, just used a dremel to grind down the inside
Because we like it
that was my other suggestion, raise it. glad you're happy with it
to be honest you're not going to get the look you want. ET35 is too aggressive of an offset. I was running that same spec (except I had...
@S3Alex showoff with your two boost gauges :P
boost tap and vent mount
I'm running a Southbend Stage 3 Endurance with a braided line. it is a bit of a workout but I don't mind that really. I don't have any problems...
What colour is your car? It's all personal preference I think
I'm running VMR V701s 19x8.5 ET45 with a 225/35 tyre, no rubbing issues at all and I'm lowered right down to the tyre. I have BC Racing coilovers...
I'm using the CTS Turbo one
Yea the gauge SHOULD be close enough in size to fit in the vent, I just slowly worked the inside down with my dremel
There a multiple companies that sell boost taps... easy enough to fit
what size gauge do you have? mines a 60mm and I didn't need the OSIR piece,...
I'll second the K04 question
Boost gauge is easy enough....depending on what size gauge you get you may or may not need a fitting for the vent... check out OSIR
CTS Turbo intercooler on mine, direct fit
you don't have to disconnect the A/C but it is a bit of a pain. We took my whole front off to include the headlights
I don't mind them for daily driving, however they are a LOT stiffer than a progressive spring but I got them exactly for that reason. I like to...
No more rubbing at all, ET45 works perfect after having AmD set up my suspension and alignment.
I have a spreadsheet for all of my...
@Starry..... Nope just a good angle on the photo
19x8.5 ET45 with 225/35 tyres
[ATTACH] This is my old set up, 19x9.5 rear ET35 and 19x8.5 ET35 front.... way too much poke
[ATTACH] Heres my new one 19x8.5 ET 45 front and...
I only did my rear lower arms because of camber adjustment and alignment running as low as I was