Separate names with a comma.
that should make it easier then , I would do it in about 7hrs on my own so with 2 of you doing it you should get it done in a day easy
easy job if you have done a clutch change before if this is your 1st time allow 2 days and make sure you got axle stands and jacks and all the tools...
What fault codes did the garage say there was mate ?
10. DJ_26 (+2)
no mate you need to take the strut out to change the top mount ,and that's only the bearing part in the photo make sure you change the other half of...
if you got a local euro car parts store near you go in there and hagal with them , I use euro for a ll my trade parts and they got room for movement...
Mines lowered on coilovers so at standard setup you should be fine mate no rubbing
ive got 18 x 8.5j with et42 with 225 and they stick out a little
I have Jom coilovers on mine and had no trouble with them being to low
Have you made the exhaust flap permently open on the tail pipes ? that helps a little . Im going to remove the front silencers straight after the...
Right I managed to get the wheel bearing done today and made a little difference but the vibration is still there so not good . Im thinking maybe...
mine doesn't only when going right
I will order a wheel bearing in tomorrow and try get it done between the services and brakes I got booked in and will update
I was going try changing my driveshaft
What have you tried mate?
yes unless you like the 4x4 look , what size tyres did you go for then ?
right ive got a 04 3.2 dsg Quattro 59kgot it April , always had this problem but has got worse over time when turning right even just the slightest...
have you tried ebay mate or do a google search
sweet might have to give that ago as looks good , you get yours from ebay?