Separate names with a comma.
Your having a rough time mate.
Have you had chance to plug it in to see what code you have?
You'd need to buy at a TPS or audi parts place mate
I was more thinking that if they did it be replaced with the genuine stuff.
It'll either need to be a TPS or Audi parts department
Can't see them causing a problem elsewhere as it's just in to the chassis.
Yeah the front wishbone bush should be longer and stick through about 10mm
Usually what happens is people drop the subframe to fit a clutch etc and...
That'll come in Handy mate:applaus:
Nice job there mate.
I've still got my diff and haldex to do next year, it seems Audi don't do or recommend a haldex filter change on the gen 4...
I would mate.
They'll probably drain it when removing the box anyway, so it's best replaced with some genuine stuff!
It's up to you though?
That's why I sent you to Samtech as most don't supply them with the release bearing/slave cylinder
You'll need some gear oil now mate
Heres a sachs one at Europarts....
Did you not buy the kit from Samtech performance? That kit had the slave with it.
Either buy a genuine one from dealer or Tps or a sachs one from...
It's been an expensive seal then mate!
Hope it works ok for you.
Keep us posted
Yeah perfectly normal.
Just means that the pcv valve is working correctly
I'd doubt this can do any damage as the timing is on the otherside of the engine so no engine damage.
It's more likely the pickup for the timing...
Good to know, thanks
My drivers ones marked but I haven't got round to that yet, although I had it in my head it was a door trim off job?
Just renewed today with Greenlight everything declared £500
My insurance is due this month and I'm still waiting on my renewal but after checking several companies my stage 2+ quotes vary from £400-£2000
Yeah spending half of that on my S3 would be another level.
It wasn't about the performance it was just something I thought I wanted but at that...
Don't worry mate I'm staying [emoji4]
Just ordered a B12 suspension kit for my S3.
Not using the springs but the dampers will match my current setup....