I'm assuming you changed the water pump at the same time of doing the cam belt ?
Just remove yours, remove all the glue/ tape left behind, spray and stick back on with number plate thin tape from halfords. Job done
Ive used JOM on all my cars and currently on the A4 been a year with no problems so far can't go wrong for the price.
i done the same thing to mine aswell, used the heat sheild from under a mates bmw when i was breaking it for him
seen drilling holes in the arch liner or fitting a slatted plate to help remove hot air (apparently)
remove fog lights (if fitted)
Piss easy mate, just use self tapping screws, get a friend to help get it equal takes about 10 mins
Got it from eBay just searched for people breaking S4 (B6/B7)
you can also go for the 2.0TFSI/3.0TDI, which are 320 front 288 rear as they are...
added cupra R splitter, changed the ride height slightly, tow strap also had a BlackSmoke remap
fitting front mount intercooler,...
Seems to pick up a tad better, MPG improved slightly as well which is a great side effect
I done mine free mod 20 mins to get it off and a long bar and hammer job done :)
Mines a straight through exhaust and mapped no problems so far
Sorted the problem is was a blown 15A fuse next to the ECU
leaving work today all good got nearly home and boost hose popped off put it back on took the car for a drive, was fine for about 2 mins of heavy...
hi guys after some advice, want some bigger rear brakes as they look stupid compared to the 345 up front
What can I use that will be a straight...
Smash the cat cells out and backbox delete sounds good and cheap
Could you post a link to the bits you used
Looks like a sline front with the dtm/ side vents added in ?
TPS is just under £40 for it new, got mine last week.
hi guys after some help had a search but can't find anything useful
I'm after the front blanking plate to remove the front number plate for the...
im selling my complete 320mm brake set up if your intersted, all straight swap aswill be coming off my 2.0TDI.
looks alot better then the 312. as...
Top of the engine, take the engine cover off, it's a paper element think the cap is a 30 or 32 mm socket can't 100% remember on the size