Available in .57 a/r from Nortech.
I reckon that would be pretty awesome with the 2867.
Gonna cost you a rod install and prob another £1k on top to take it to hybrid level. That's your easiest and cheapest option for more power.
Fuchs Titan race
Millers nano drive
And plugs get ngk copper like tuffty mentioned above
Ive converted to M10, and still have these problems.
This will vary from user to user with different manifolds, different exhausts, different...
Its a decent setup for the money to be fair. And it would definitely produce the numbers.
But as bill says, T25 M8 has its problems and its just...
I'd very much doubt a 1.6 tfsi box will fit a quattro car
Shred your hands to bits fitting side light bulbs!
Ming blue really is a great colour.
You're not alone with the less than perfect bodywork. Old cars now so they're starting to show it
Got a speeding ticket
Bushes, bearings and links should be first imo.
You can buy lots of expensive suspension, roll bars etc, but if they aren't mounted solidly they...
They were at 90% during mapping.
I do need to check my fuel pressure at the top end, just haven't had time.
New Intank and a da-31 inline tho so...
^^ he's the only man you should consider for the job ^^
The simplest ones would be cars with a ko4, so you have the S3s which are BAM, AMK, APY. Then there are 225 TT which have one other engine code...
If you're not tuning the ******** off it then it wont be beneficial.
Some have reported their cars feeling flat following a large port head with...
id be disconnecting the battery and pulling a fuse such as the fuel pump fuse.
I see. Thanks for elaborating
Stock cams don't have torque drop off???
This is cam related. All cars with stock cams will do this
With the stock system you have the inlet manifold relieving that pressure under vacuum.
In simplifying the pcv and catch can you've blocked that...