I'm from Wigan area
Yes u need new cluster with full dis. Some loom for a stalk and a stalk itself.
It would be worth also to fit oil sensor in...
JohnStan725 where are u from?? I might help u with it.
You just have 1/2 dis and no more info u will get unless u swap it onto full dis.
I'm a ASN member for a quite a long time but never bother to put my name down so now here I am:
1 - Ruffrida - B6 Avant Quattro - Wigan
2 - Tay -...
@Dani_B19 pictures will not help u. Unless u want a diagram.
No it is not that easy.
I've tried that what u were saying but unfortunately the frequency chip has got 434MHz where the ours is 433
@Dohcwp brilliant memory lad:)
No worries I wait but don't forget please:)
On top of the unit u have two metal clips (one for each side)
When u pull your radio unit off u will be able to put small screwdriver to push it...
Scotty24 would u be so nice and do me some photos of your S3 seats, please?? I would like to see how the subframe sits on rails
Immo is in the clocks so yes as higgysmalls says it need coding immo
What engine did u have before??
If u do have another one then just replace it or replace just the front panel
U need to get unit out then unscrew front panel of it. It has got a couple silver very small torx bolts. Then unscrew electrical circuit again...
Uk illegal but looks nice
Main fuse box mate. Not under the bonnet.
Sorry my apologise certainly is. Disabling is better then cutting. That will give more to thing if someone find this
Pad sensor faulty - common fault nothing to worry about. Just disable it with vcds.
Take the fuse out of the haldex ecu and try to drive. It is...
Yes it does mate. Temp sensor will show u temp or won't
This is a difference
Check central locking pump and alarm siren if is not wet.
That place behind tail lamp likely to be sinked up there.
1. Take door card off and check that linkage. Common problem they like to be snapped.
2. Look at ebay there is offer for 99quid including new...