Here in Portugal it's the same... it's not legal
They use an adaptor plate, I want to do it like your's without adapter plate
Ok I'll do one to match my manifold thanks
I have one machined manifold but I'm searching for good quality mounting parts
Do you sell only the adapter for tfsi turbos???
I've done this in my s3 lhd version, I'm using 70mm downpipe and 76mm exhaust!
The turbo it's not from TTE
I tried this with a vag tacho cable and it is saying that for me7 it can't read the SKC.....
I marked them in place there's no way I had it wrong. So the engine was opened in the past... And it's very strange... Could it be from factory ?
Hi, I'm installing new rods, so I marked the position of the stock. In the stock rods the grooves of the rod bearing are in the side of the...
I'll have to do one... It's just a question of time... But I'm apprehensive
It's almost a straight pipe.... :)
I think that the downpipe it's a problem with that one to....
Using the IE intake camshaft can he gain something? Or it's the turbo beeing the limitation???
They are very rare even in germany... I tried to bid but it ended very high
I'm building an engine with, rods, AEB head and the turbo will be the k04-064 k16 hybrid version...
I've reading and camshafts for this type of...
Bill, what about the cold side??
What do you think about that curve TIP?
Gops, that Loba it's a different turbo, look again, the Loxx it's the TTRS turbo in the k04-064 exhaust side.
Water and oil line are easy to do...
I think I've read the stock from the 1.8t the only change was in the oil drain. Am I wrong???