- Joined
- Sep 14, 2008
- Messages
- 24,836
- Reaction score
- 6,078
- Points
- 113
- Location
- Wibbleton
- Website
- www.tuffty.co.uk
I bought all the bits from the Jetex website in the end...
http://www.jetex.co.uk/website/custom_parts.php?mat=Stainless&dia=3.0+inch
Parts I bought were...
U347663R
SPLIT 76 Silencer box - Oval H=140mm / W=220mm / L=320mm [1 x 3 inch in / 2 x 2.5 inch out]
£103.12
...used for the back box...
U457600R
TURBONETT Silencer box - Round 125mm / L=250mm
£60.96
...used for the centre box...
U690100R
Stainless Steel M18 Lambda Boss (1.5mm)
£6
...used for the post cat lambda
U015150R
500mm pipe with swaged 2 inch end
£13.46
...used to make the slash cut tailpipes
Plus a flange, length of 3" SS tube, 4 x 90deg 3" bends and some SS rod for the hangers that Bill had already (not sure how much as yet, £120ish?)
...oh and some clamps of course
I am planning on fitting a different box on the back as its currently a little too boomy in the car under certain circumstances, but it has quietened down quite a bit now its been on a while.
<tuffty/>
http://www.jetex.co.uk/website/custom_parts.php?mat=Stainless&dia=3.0+inch
Parts I bought were...
U347663R
SPLIT 76 Silencer box - Oval H=140mm / W=220mm / L=320mm [1 x 3 inch in / 2 x 2.5 inch out]
£103.12
...used for the back box...
U457600R
TURBONETT Silencer box - Round 125mm / L=250mm
£60.96
...used for the centre box...
U690100R
Stainless Steel M18 Lambda Boss (1.5mm)
£6
...used for the post cat lambda
U015150R
500mm pipe with swaged 2 inch end
£13.46
...used to make the slash cut tailpipes
Plus a flange, length of 3" SS tube, 4 x 90deg 3" bends and some SS rod for the hangers that Bill had already (not sure how much as yet, £120ish?)
...oh and some clamps of course
I am planning on fitting a different box on the back as its currently a little too boomy in the car under certain circumstances, but it has quietened down quite a bit now its been on a while.
<tuffty/>
Last edited: