Help locating oil temp etc in ecu group

NIGE28 · Nov 21, 2017

Is anyone able to help, I'm trying to setup my collections list on my FIS display.

I have used the rosstech list but the groups are not matching up to the ones on my display.

I am trying to get :

Oil temp
IAT
Water temp
AFR
BOOST

I am looking in engine 01

<tuffty/> · Nov 21, 2017

oil temp is from instruments, IAT is 118, waster temp is 001, AFR is 31, boost is 115

<tuffty/>

NIGE28 · Nov 22, 2017

So oil temp can only be read from instruments ? Guess I can have the other 4 with my oil pressure and the temp will have to go on another preset.

Seen lots of screen shots with oil temp on the list figured there was another way

<tuffty/> · Nov 22, 2017

NIGE28 said:
So oil temp can only be read from instruments ? Guess I can have the other 4 with my oil pressure and the temp will have to go on another preset.

Seen lots of screen shots with oil temp on the list figured there was another way

1.8t doesn't actually have an oil temp sensor as such.. its read from the oil sensor in the sump which is used for level and oil quality monitoring... this is fed to the instruments.... the ECU doesn't care about oil temp as it has water temp as its gauge

I would personally use the external sensors inputs for oil temp... this is what I did for oil temp and oil pressure on my FIS Control

<tuffty/>

Search

Search

Help locating oil temp etc in ecu group

NIGE28

Registered User

<tuffty/>

Badger 5 Edition...Its all about the flow...

NIGE28

Registered User

<tuffty/>

Badger 5 Edition...Its all about the flow...

Similar threads