Rowanh
Registered User
- Joined
- Sep 27, 2016
- Messages
- 12
- Reaction score
- 2
- Points
- 3
After purchasing some LCR Brembos and rebuilding them over the passed week i am finally ready to attempt giving the system a bleed.
After a lot of digging and searching on this forum and others to find a complete guide for anyone to follow when either just bleeding the brakes or fully flushing the system with new fluid, i came up a little bit unsure as there is a lot of conflicting information on this topic.
So i was hoping to gather some decent information from people on here, put it to use and if it works put together a guide with photos for others.
Does anyone have a good basis to follow while attempting this?
I am going to attempt to flush the whole system through and i have Vag-com to be able to activate the ABS bleed function.
Can i just simply use Vag-com on each corner to push through new fluid through and just keep the reservoir topped up?
Or do i still need to use a pressure bleeder?
Any information from anyone that has successfully gone through this already would be great.
Cheer all.
After a lot of digging and searching on this forum and others to find a complete guide for anyone to follow when either just bleeding the brakes or fully flushing the system with new fluid, i came up a little bit unsure as there is a lot of conflicting information on this topic.
So i was hoping to gather some decent information from people on here, put it to use and if it works put together a guide with photos for others.
Does anyone have a good basis to follow while attempting this?
I am going to attempt to flush the whole system through and i have Vag-com to be able to activate the ABS bleed function.
Can i just simply use Vag-com on each corner to push through new fluid through and just keep the reservoir topped up?
Or do i still need to use a pressure bleeder?
Any information from anyone that has successfully gone through this already would be great.
Cheer all.