Where to buy this? and some other retrofit

Veseli1094

Veseli1094

Registered User
Joined
Oct 18, 2016
Messages
94
Reaction score
19
Points
8
Location
Croatia
1) Does anyone know where to buy one of this lights if its availble anywhere?!?!?!?!





2) i have audi c6 4.2 2008 and i want to put navigation unit so i dont know what i need for that.

my car dont have shark fin on roof, dont have navigation dvd drive.
and i do not know is my car pre wire for navigation unit.

3) if i want to add jukebox and if i want to play music from usb i need to retrofit ami and dab right?

4) i have heated front and back seat so i am asking can i retrofit ventilation for the front too?

5) and for the last i probably know sad answer but i am wondering can i put sunroof in the car without it because i want it so much
 
1) Not available anywhere, yest. As far as I know. Need to be done. Lamps have to be taken apart and leds exchanged with dynamic module added.
I'm after same thing. Second video must be new as I haven't seen that. Polish company does that. Its too slow and the first one a bit too fast.
I have a plan how to do the rear ones in dynamic version but still away on my to-do-list.

2) There is a guy here B5NUT which done a lot in he's preface lift A6 so it would be good to ask him. Seems to know all about retrofitting and rewiring.
Search for he's 12 page rebuild thread as it's very educational.

3) As above

4) ??? You want what?!

5) Yes, you can. You just need a bit of fun with angle grinder, sunroof and all wiring harnesses. Additional bits and bobs such a roof dome control.

Don't forget to have access to VCDS to complete all above points.

Have fun and let us know how did it go,. Post some pictures when done.
 
Tnx for all other answers

4) i want to put cooling into seat if it possible

I will post some pictures but first need to see how much money planing to spend and need to see if i can and know how to do sunroof
 
1. It looks like someone has modified a set of facelift LED headlights, the lights without all of the sweeping mods would be around £800 + mods + either a firmware update or replacement of the central electric module, as the prefacelift module does not support LED headlights, so you would be looking at £1,000+

2.There are no harnesses to just fit navigation, a retrofit is possible but we need to know your MMI version (basic - red screen, basic plus red screen + extra button on the control panel or MMI 2G high colour screen)

3. Same as 2.

4. No you cannot add ventilation, it was never an option on the C6.

5. I would just buy a car with a sunroof, unless you don't mind spending £1476.75 for the roof panel then another £2k + for all the other parts, sunroof, frame, seals, wiring etc. You would also need to be very with good with a grinder, welder, and can respray the car or know a very good body shop. Even if you find the parts used it would still be a 4 figure retrofit.
 
  • Like
Reactions: Sandra
Ok tnx B5NUT so jut few mor question

For navigation retrofit i will send you pic and information here in 2-3 day when i got home because i need navigatio

And for ventilated seats i ask because i dont like when buttons is empty or when they didnt use for something

For buttons next to parking sensors button and esp i know that there goes buttons for rear shade and for audi lane asist but on climatronic under heated seats button its empty so i was thinking that cooling options goes under that if you knw what i mean
 
Tnx everything is easy except instaling shark fin factory antena on the roof this will be a little harder to do
 
audi upgrades
I love it Tom.
How, where and how much for have got it done?
Nice car you have.
Seen your insta.
Love the way your car sits on those RS6 wheels. My next purchase is set of those also
 
Veseli1094 said:
Where did you buy it or how you made it?????? its sick :O :)
Click to expand...

Speak to Ric or Stefan - DM them on Instagram :
http://instagram.com/7_lights


KrisKrk said:
I love it Tom.
How, where and how much for have got it done?
Nice car you have.
Seen your insta.
Love the way your car sits on those RS6 wheels. My next purchase is set of those also
Click to expand...

Speak to Ric or Stefan - DM them on Instagram :
http://instagram.com/7_lights

Thanks, it makes for a decent workbuss
The segment wheels are a nice design, I like them on the C6 shape. Even though my car is lowered on Eibach Pro springs is sits poorly at the front, Eibach seem keen to help at the start.....but then that soon turned to, just buy a pair of different springs from us ! Shame, as I've had Eibach springs on every car and they work well. The customer support has left me with a slightly bitter taste in my mouth.


Veseli1094 said:
did someone noticed that his fog light blinks on the start :)
Click to expand...

I used to have LED fog light bulbs from Trups on here, the flicker you see was the cars bulb error check being performed, as it's not possible to turn this off via VCDS on the FL A6 platforms. I ran error correction resistors and they use to work fine, but one LED buld failed, and it never got replaced by Trups, so I now have stock bulbs in the fogs
 
  • Like
Reactions: KrisKrk
Thanx Tom.
Havent got insta and don't plan to have it. Is there any other way of contacting them? Where are they based? Any website?

I'm not planning to lower my car so I think them wheels will be nice in grey on my car with stock shocks. Was thinking to upgrade to 20" and/or lower it but it will have a impact on ride. Got back back already and would like at least a bit of comfort on the road.
Big companies reputation can be easily destryed just because someone had a bad day. I'm sure you'll come bask to eibach on future cars.

Blinking fogs are also on my car.
Had some cheap fleebay led bulbs on but error came up. They meant to be canbus, apparently.
I've changed them to those leds with heatsink and added ressistorss.
As you say, blinking cannot be coded out but at least I've got rid of dash error.
 
Use this email address to contact them :

Keepyourvoltage@mail.de

Ref lowering ..... the ride is perfectly acceptable on Eibach Pro springs
Your back will be fine if it's ok on the stock sline setup

Agreed, it doesn't take much to reuin a reputation. TBH, I will always favour Eibach, eye offer a great product with allot of R&D behind which kit.

The blinking thing annoyed me allot, I spent strong money on bulbs that would fix this and still had to get the error resistors ..... so I got annoyed and just put the stock bulbs in, the blinking bugs me (OCD)


Tom
 
audi upgrades
Thx Tom for the contact.

.de email means company is based in Germany or just origin of email?

Where did you got it done?
 
they send me price options for this dynamic lights

1) withouts adaptive function is 780€ and with adaptive function is 820€

2) The price for a conversion plug and play (you send uthem facelift headlights): 540 € + shipping.Without Attachments ( xenon components , service cover)

3) they also offer a conversion kit if you dare to open the headlights by your own and install everything according to instructions. they will send you a manual with pictures. Price: 380€
 
  • Like
Reactions: KrisKrk
1 other thing

i dont want to start new thread so i will ask here

few weeks ago i lost my second audi c6 key fob (with unlock,lock,and trunk buttons) so i am wondering can i buy some spare key on ebay and then reprogram it myself or i need to change whole sistem and go to the dealer
 
Veseli1094 said:
they send me price options for this dynamic lights

1) withouts adaptive function is 780€ and with adaptive function is 820€

2) The price for a conversion plug and play (you send uthem facelift headlights): 540 € + shipping.Without Attachments ( xenon components , service cover)

3) they also offer a conversion kit if you dare to open the headlights by your own and install everything according to instructions. they will send you a manual with pictures. Price: 380€
Click to expand...

That is quite hefty for what it is.

Read somewhere that headlamps are sealed units somehow and you cannot open them. Seen Chinese video on YT where a guy cuts out a part of headlamp with some plastic cutter/iron to get the DRL board out.

Seen one Polish company on YT also doing that conversion but cannot find the video now. Wonder how much would they charge.

Veseli1094 said:
1 other thing

i dont want to start new thread so i will ask here

few weeks ago i lost my second audi c6 key fob (with unlock,lock,and trunk buttons) so i am wondering can i buy some spare key on ebay and then reprogram it myself or i need to change whole sistem and go to the dealer
Click to expand...

You can buy the remote from eBay but you need to make sure it is the same model with same transmitting frequency and same blade type. Than you need to program it and get the blade cut.
 
  • Like
Reactions: Veseli1094
KrisKrk said:
That is quite hefty for what it is.

Read somewhere that headlamps are sealed units somehow and you cannot open them. Seen Chinese video on YT where a guy cuts out a part of headlamp with some plastic cutter/iron to get the DRL board out.

Seen one Polish company on YT also doing that conversion but cannot find the video now. Wonder how much would they charge.



You can buy the remote from eBay but you need to make sure it is the same model with same transmitting frequency and same blade type. Than you need to program it and get the blade cut.
Click to expand...

How to program key?

I know how to open headlight but you need owen because the glass and plastic housing is glued with some thermal glue or something like that :)
 
Few vidoes on YT how to program the key. Try there
 
Ok will try
Two last question
If i change battery in key fob do i need to reprogram key?
And if i change car battery for new one with same spec do i need to use vcds for som reprogram
 
I doubt any programming would be needed if you change batteries in the car or key, I think. It would be just stupid or way of making more money out of us by already expensive dealerships.

Do you know where to look for the key details?
They are in the blade slot.
 
ok tnx i will look tomorow when i get home and will order key on ebay if i find it and probably some interior modification like wrap some door panels and something like that
 
To be completely fair and honest.
The headlight units come to the highest standard. The component grade it very very high, the control units a very well designed and build.
They open, build and resell the units very carefully, I've had no issues with condensation due to them being opened.

The guys offer first class after sales support, emails and contact is answered promptly and anything you need is dealt with swiftly and efficantly

I admit, they're not the cheapest modification to your car, but, the are factory standard quality, OEM+ look and interstate seemlessly into your cars systems, error free and for me, they look impressive

They're well worth the cost of the upgrade .... I cannot recommend them enough


If you have any questions, feel free to ask

Tom
 
  • Like
Reactions: Veseli1094
You must log in or register to reply here.

Similar threads

Compkiler
Decisions on wether to buy an S6 or not?
Replies
0
Views
603
Compkiler
Compkiler
gupsterg
Audi A6 V6 TDi and other VAG models swirl flap arm and butterfly repair kits
Replies
6
Views
18K
Robert Sime
R
Bbflex
MMI basic+ to 2g retrofit questions
Replies
0
Views
1K
Bbflex
Bbflex
R
Looking to buy a6 2.0 tdi
Replies
8
Views
1K
Riz123
R
bentwenty
Where to fit USB and aux in port for Dension Gateway 500s BT
Replies
26
Views
7K
rallymangtb
R
Top
Back