Help with correct coding after installing Dension gateway pro

Hi all
Can anyone please give me the correct coding for the modules that are showing fault codes in the scan below please?
I have installed firmware version 51 as advised by Dension customer support prior to doing the scan, Dension advised me that this firmware suits my model of car as against using the later version of firmware.
Thanks in advance


Address 37: Navigation Labels: 8E0-035-192-RNSE.clb
Part No SW: 8E0 035 192 K HW: 8E0 035 192 K
Component: RNS-E HIGH EU H73 0650
Revision: 02S Serial number: AUZBZ7F1149755
Coding: 0309115
Shop #: WSC 00000 785 00200
VCID: 2C5168318CA2522222-51B2

1 Fault Found:
01044 - Control Module Incorrectly Coded
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 7
Fault Frequency: 1
Reset counter: 155
Time Indication: 0
Date: 2016.09.25
Time: 18:43:00


-------------------------------------------------------------------------------
Address 56: Radio Labels: 8E0-035-192-RNSE.clb
Part No SW: 8E0 035 192 K HW: 8E0 035 192 K
Component: RNS-E HIGH EU H73 0650
Revision: 02S Serial number: AUZBZ7F1149755
Coding: 0309115
Shop #: WSC 00000 785 00200
VCID: 2C5168318CA2522222-5196

1 Fault Found:
01044 - Control Module Incorrectly Coded
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 7
Fault Frequency: 1
Reset counter: 155
Time Indication: 0
Date: 2016.09.25
Time: 18:43:57



-------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 8E0-953-549.lbl
Part No: 8E0 953 549 Q
Component: Lenksáulenmodul 0701
Coding: 04041
Shop #: WSC 06325
VCID: 418F29854B20AF4AE1-4B32

1 Fault Found:
01301 - Control Module for Voice Recognition (J507)
49-00 - No Communications