Headlight removal

Hope this helps....

BUMPER REMOVAL

1 ) Jack up, remove front wheels
2 ) Remove front part of fender liners
3) Remove the 2 10mm nuts on studs at
the corners toward the sides holding the
nose to the body shell. Loosen 2 torx
bolts holding black side clip
4) Remove the 6 torx bolts along the top of
the nose
5 ) Remove 2 phillips screws at the bottom
6) Pull nose off, unclip aliens.

HEADLIGHT REMOVAL

R emove the 3 TORX BOLTS
1 ) Remove front one
2 ) Remove top one
3) Loosen bottom one (from inside the
wheel well) and flip support bracket
out of the way
4) Wiggle out and unplug

full pictorial instructions here
http://www.wak-tt.com/mods/angeleyes/eclipse_lights_howto/fittings.htm

There are 3 torx bolts but none inside the wheel well.
The headlight has two top bolts and a front bolt behind the grill
Then a locating peg at one corner.